Tap WaterIndex

← All contaminants

Contaminant guide

Di(2-ethylhexyl) Adipate in drinking water

The EPA limit for Di(2-ethylhexyl) Adipate in drinking water is 400 µg/L. Of the 24,902 water suppliers tested, 227 had it detected.

400 µg/L
EPA limit (MCL)
0.9%
of suppliers detected it
(227/24,902)

What the EPA limit means

⚖️

400 µg/L

Maximum Contaminant Level — the enforceable ceiling a supplier must stay under.

🎯

400 µg/L

Health goal (MCLG) — the level with no known health effect. It is a goal, not a legal limit, and is often zero for carcinogens.

🧪

SYR4

Where these measurements come from. Hover the tag for the EPA programme and years.

Where Di(2-ethylhexyl) Adipate was found

The water suppliers reporting the highest levels, worst first.

SupplierCityStateLevel vs EPA limit
Ramah-Sunset Valley Rnua Ramah, Sunset Valley NM
279 µg/L 70%
of the EPA limit 400 µg/L
Coon Rapids Coon Rapids MN
45 µg/L 11%
of the EPA limit 400 µg/L
Halcyon Acres Water Users Association Tucson AZ
16 µg/L 4%
of the EPA limit 400 µg/L
Parker Wsd Parker CO
11 µg/L 2.8%
of the EPA limit 400 µg/L
Kissimmee Rv Park Kissimmee FL
7.77 µg/L 1.9%
of the EPA limit 400 µg/L
Fritch Municipal Water Supply Fritch TX
7.48 µg/L 1.9%
of the EPA limit 400 µg/L
New Brockton Water Department New Brockton AL
6.39 µg/L 1.6%
of the EPA limit 400 µg/L
Beaverville Beaverville IL
5.7 µg/L 1.4%
of the EPA limit 400 µg/L
Aspc Lewis Complex Water System Buckeye AZ
5 µg/L 1.3%
of the EPA limit 400 µg/L
Windstar Park Inc. Warsaw IN
4.9 µg/L 1.2%
of the EPA limit 400 µg/L
Edmond Pwa Edmond OK
4.33 µg/L 1.1%
of the EPA limit 400 µg/L
Carolantic Park Hillsborough NC
4.1 µg/L 1%
of the EPA limit 400 µg/L
Trout Valley Homes Assoc. 1 Bettendorf IA
4.1 µg/L 1%
of the EPA limit 400 µg/L
City of Rayne Water System Rayne LA
4.07 µg/L 1%
of the EPA limit 400 µg/L
Madison, City of Madison NE
4.01 µg/L 1%
of the EPA limit 400 µg/L
Rapid Creek Ridge Iowa City IA
3.8 µg/L 1%
of the EPA limit 400 µg/L
Las Vegas Valley Water District Las Vegas NV
3.3 µg/L 0.8%
of the EPA limit 400 µg/L
Tri Cnty Jt Muni Auth Fredericktown PA
2.78 µg/L 0.7%
of the EPA limit 400 µg/L
Driggs City of Driggs ID
2.65 µg/L 0.7%
of the EPA limit 400 µg/L
St. Cloud, City of (3 Wps) St Cloud FL
2.61 µg/L 0.7%
of the EPA limit 400 µg/L
Fox Laurel Mobile Home Park, Llc Montville CT
2.4 µg/L 0.6%
of the EPA limit 400 µg/L
Scituate Water Division Scituate MA
2.4 µg/L 0.6%
of the EPA limit 400 µg/L
Hoey-De Graw Waterworks Forestburgh NY
2.38 µg/L 0.6%
of the EPA limit 400 µg/L
San Jacinto Sud Coldspring TX
2.3 µg/L 0.6%
of the EPA limit 400 µg/L
Manalapan Wtp (Leroy C.Paslay) Manalapan FL
2.29 µg/L 0.6%
of the EPA limit 400 µg/L

Frequently asked questions about Di(2-ethylhexyl) Adipate

What is Di(2-ethylhexyl) Adipate in drinking water?

Di(2-ethylhexyl) Adipate is monitored in US public drinking water under EPA rules. Each supplier's result is reported to the EPA and published here with its source and period.

What is the EPA limit for Di(2-ethylhexyl) Adipate?

The EPA's Maximum Contaminant Level for Di(2-ethylhexyl) Adipate is 400 µg/L, and its health goal (MCLG) is 400 µg/L. A result above the limit means the supplier must act; the goal is the level at which no health effects are expected.

How common is Di(2-ethylhexyl) Adipate in US tap water?

Of the 24,902 water suppliers with results on file, 227 detected Di(2-ethylhexyl) Adipate — 0.9% of those tested.