What was found in Cushing's water
The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.
| Contaminant | Level vs EPA limit | Suppliers | Source |
|---|---|---|---|
| Copper | 2980 µg/L 229% of the EPA limit, in the worst sample — 1300 µg/L | 2/2 | SYR4 |
| Fluoride | 250 µg/L 6.3% of the EPA limit 4000 µg/L | 2/2 | SYR4 |
| TTHM | 162 µg/L 203% of the EPA limit, in the worst sample — 80 µg/L | 2/2 | SYR4 |
| Chloroform | 114 µg/L No EPA limit set | 2/2 | SYR4 |
| Bromate | 79 µg/L 790% of the EPA limit, in the worst sample — 10 µg/L | 1/2 | SYR4 |
| Total Haloacetic Acids (HAA5) | 74.7 µg/L 125% of the EPA limit, in the worst sample — 60 µg/L | 2/2 | SYR4 |
| Barium | 71 µg/L 3.6% of the EPA limit 2000 µg/L | 2/2 | SYR4 |
| Nitrate | 44 µg/L 0.4% of the EPA limit 10000 µg/L | 2/2 | SYR4 |
| Nitrate-Nitrite | 42.6 µg/L 0.4% of the EPA limit 10000 µg/L | 2/2 | SYR4 |
| Bromodichloromethane | 37.5 µg/L No EPA limit set | 2/2 | SYR4 |
| Trichloroacetic Acid | 36.5 µg/L No EPA limit set | 1/2 | SYR4 |
| Lead | 32.6 µg/L 217% of the EPA limit, in the worst sample — 15 µg/L | 2/2 | SYR4 |
| Dichloroacetic Acid | 25.7 µg/L No EPA limit set | 2/2 | SYR4 |
| Dibromoacetic Acid | 20.8 µg/L No EPA limit set | 1/2 | SYR4 |
| Monochloroacetic Acid | 19.4 µg/L No EPA limit set | 2/2 | SYR4 |
| Dibromochloromethane | 15.2 µg/L No EPA limit set | 2/2 | SYR4 |
| Gross Beta Particle Activity | 7.7 pCi/L No EPA limit set | 1/2 | SYR4 |
| Cyanide | 6.14 µg/L 3.1% of the EPA limit 200 µg/L | 2/2 | SYR4 |
| Chromium | 3.2 µg/L 3.2% of the EPA limit 100 µg/L | 2/2 | SYR4 |
| Dalapon | 2.02 µg/L 1% of the EPA limit 200 µg/L | 1/2 | SYR4 |
| Monobromoacetic Acid | 2 µg/L No EPA limit set | 1/2 | SYR4 |
| Bromoform | 1.7 µg/L No EPA limit set | 1/2 | SYR4 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 2/2 | SYR4 |
| Arsenic | 1.2 µg/L 12% of the EPA limit 10 µg/L | 1/2 | SYR4 |
| Xylenes, Total | 0.5800 µg/L 0% of the EPA limit 10000 µg/L | 1/2 | SYR4 |
| Toluene | 0.5200 µg/L 0.1% of the EPA limit 1000 µg/L | 1/2 | SYR4 |
| Thallium, Total | 0.2440 µg/L 12% of the EPA limit 2 µg/L | 1/2 | SYR4 |
| Asbestos | 0.1850 MFL 2.6% of the EPA limit 7 MFL | 1/2 | SYR4 |
| Beryllium, Total | 0.0820 µg/L 2.1% of the EPA limit 4 µg/L | 1/2 | SYR4 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 2/2 | LCR |
Water suppliers serving Cushing
| Supplier | Population served |
|---|---|
| CITY OF CUSHING | 1,007 |
| LILBERT LOONEYVILLE WSC | 682 |
Frequently asked questions about Cushing tap water
Is Cushing tap water safe to drink?
EPA testing detected 30 contaminants in the water serving Cushing. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.
How many water suppliers serve Cushing?
2 public water suppliers report drinking-water monitoring for Cushing, Texas to the EPA. Each is listed above with its population served.
What contaminants are in Cushing's water?
The contaminants EPA monitoring detected in Cushing include Copper, Fluoride, TTHM, Chloroform, Bromate. The full list, with the highest level found and the data source, is in the table above.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.