← Texas

Tap water quality report

Arlington, TX

EPA monitoring detected 34 contaminants across the 2 water suppliers serving Arlington. A detection doesn't automatically mean the water is unsafe — see the highest level found for each below, with its EPA source and period.

2
water suppliers
413,955
people served
34
contaminants found

What was found in Arlington's water

The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Fluoride
804 µg/L 20%
of the EPA limit 4000 µg/L
2/2 SYR4
Nitrate
721 µg/L 7.2%
of the EPA limit 10000 µg/L
2/2 SYR4
Copper
490 µg/L 38%
of the EPA limit 1300 µg/L
2/2 SYR4
Nitrate-Nitrite
470 µg/L 4.7%
of the EPA limit 10000 µg/L
1/2 SYR4
Cyanide
118 µg/L 59%
of the EPA limit 200 µg/L
2/2 SYR4
Barium
60 µg/L 3%
of the EPA limit 2000 µg/L
2/2 SYR4
TTHM
54.9 µg/L 69%
of the EPA limit 80 µg/L
2/2 SYR4
Lead
46.8 µg/L 312%
of the EPA limit, in the worst sample — 15 µg/L
1/2 SYR4
Bromodichloromethane
28.9 µg/L
No EPA limit set
2/2 SYR4
Total Haloacetic Acids (HAA5)
28.3 µg/L 47%
of the EPA limit 60 µg/L
2/2 SYR4
Chloroform
25.2 µg/L
No EPA limit set
2/2 SYR4
Dibromoacetic Acid
22.7 µg/L
No EPA limit set
2/2 SYR4
Dichloroacetic Acid
16.9 µg/L
No EPA limit set
2/2 SYR4
Bromate
14.4 µg/L 144%
of the EPA limit, in the worst sample — 10 µg/L
2/2 SYR4
Dibromochloromethane
11 µg/L
No EPA limit set
2/2 SYR4
Monochloroacetic Acid
8 µg/L
No EPA limit set
2/2 SYR4
Trichloroacetic Acid
7.1 µg/L
No EPA limit set
2/2 SYR4
Gross Beta Particle Activity
5.2 pCi/L
No EPA limit set
2/2 SYR4
Monobromoacetic Acid
5.2 µg/L
No EPA limit set
2/2 SYR4
Bromoform
5 µg/L
No EPA limit set
2/2 SYR4
Di(2-ethylhexyl) Phthalate
3.19 µg/L 53%
of the EPA limit 6 µg/L
1/2 SYR4
Selenium
2.59 µg/L 5.2%
of the EPA limit 50 µg/L
2/2 SYR4
Arsenic
2.26 µg/L 23%
of the EPA limit 10 µg/L
2/2 SYR4
Chromium
1.66 µg/L 1.7%
of the EPA limit 100 µg/L
2/2 SYR4
Atrazine
0.6400 µg/L 21%
of the EPA limit 3 µg/L
2/2 SYR4
Antimony, Total
0.4420 µg/L 7.4%
of the EPA limit 6 µg/L
2/2 SYR4
Simazine
0.1400 µg/L 3.5%
of the EPA limit 4 µg/L
2/2 SYR4
Thallium, Total
0.0170 µg/L 0.9%
of the EPA limit 2 µg/L
1/2 SYR4
Pfba
0.0080 µg/L
No EPA limit set
1/2 UCMR-5
Pfpea
0.0065 µg/L
No EPA limit set
1/2 UCMR-5
PFBS
0.0059 µg/L
No EPA limit set
1/2 UCMR-5
Pfhxa
0.0050 µg/L
No EPA limit set
1/2 UCMR-5
PFOS
0.0046 µg/L
No EPA limit set
1/2 UCMR-5
Lead
0.0010 mg/L 6.8%
of the EPA limit 0.0150 mg/L
1/2 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Arlington

SupplierPopulation served
CITY OF ARLINGTON 413,955
TRA TARRANT COUNTY WATER PROJECT 0

Frequently asked questions about Arlington tap water

Is Arlington tap water safe to drink?

EPA testing detected 34 contaminants in the water serving Arlington. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Arlington?

2 public water suppliers report drinking-water monitoring for Arlington, Texas to the EPA. Each is listed above with its population served.

What contaminants are in Arlington's water?

The contaminants EPA monitoring detected in Arlington include Fluoride, Nitrate, Copper, Nitrate-Nitrite, Cyanide. The full list, with the highest level found and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.