← Florida

Tap water quality report

Fort Meade, FL

EPA monitoring detected 42 contaminants across the 3 water suppliers serving Fort Meade. A detection doesn't automatically mean the water is unsafe — see the highest level found for each below, with its EPA source and period.

3
water suppliers
5,615
people served
42
contaminants found

What was found in Fort Meade's water

The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Nitrate
3800 µg/L 38%
of the EPA limit 10000 µg/L
3/3 SYR4
Fluoride
716 µg/L 18%
of the EPA limit 4000 µg/L
3/3 SYR4
Nitrite
251 µg/L 25%
of the EPA limit 1000 µg/L
2/3 SYR4
Total Haloacetic Acids (HAA5)
84.4 µg/L 141%
of the EPA limit, in the worst sample — 60 µg/L
3/3 SYR4
TTHM
67 µg/L 84%
of the EPA limit 80 µg/L
3/3 SYR4
Combined Uranium
23.84 µg/L 79%
of the EPA limit 30 µg/L
1/3 SYR4
Barium
23.3 µg/L 1.2%
of the EPA limit 2000 µg/L
3/3 SYR4
Copper
18.7 µg/L 1.4%
of the EPA limit 1300 µg/L
2/3 SYR4
Endothall
9 µg/L 9%
of the EPA limit 100 µg/L
1/3 SYR4
Selenium
8.6 µg/L 17%
of the EPA limit 50 µg/L
2/3 SYR4
Glyphosate
6 µg/L 0.9%
of the EPA limit 700 µg/L
1/3 SYR4
Chromium
4.7 µg/L 4.7%
of the EPA limit 100 µg/L
3/3 SYR4
Arsenic
2.1 µg/L 21%
of the EPA limit 10 µg/L
2/3 SYR4
Oxamyl
2 µg/L 1%
of the EPA limit 200 µg/L
1/3 SYR4
Antimony, Total
1.1 µg/L 18%
of the EPA limit 6 µg/L
2/3 SYR4
Carbofuran
0.9000 µg/L 2.3%
of the EPA limit 40 µg/L
1/3 SYR4
Di(2-ethylhexyl) Adipate
0.6000 µg/L 0.2%
of the EPA limit 400 µg/L
1/3 SYR4
Di(2-ethylhexyl) Phthalate
0.6000 µg/L 10%
of the EPA limit 6 µg/L
1/3 SYR4
Dichloromethane
0.5200 µg/L 10%
of the EPA limit 5 µg/L
1/3 SYR4
Toxaphene
0.5000 µg/L 17%
of the EPA limit 3 µg/L
1/3 SYR4
Lead
0.4000 µg/L 2.7%
of the EPA limit 15 µg/L
2/3 SYR4
Thallium, Total
0.4000 µg/L 20%
of the EPA limit 2 µg/L
2/3 SYR4
2,4,5-TP
0.2000 µg/L 0.4%
of the EPA limit 50 µg/L
1/3 SYR4
Dinoseb
0.2000 µg/L 2.9%
of the EPA limit 7 µg/L
1/3 SYR4
Lasso
0.2000 µg/L 10%
of the EPA limit 2 µg/L
1/3 SYR4
2,4-D
0.1000 µg/L 0.1%
of the EPA limit 70 µg/L
1/3 SYR4
Atrazine
0.1000 µg/L 3.3%
of the EPA limit 3 µg/L
1/3 SYR4
Dalapon
0.1000 µg/L 0.1%
of the EPA limit 200 µg/L
1/3 SYR4
Diquat
0.1000 µg/L 0.5%
of the EPA limit 20 µg/L
1/3 SYR4
Hexachlorobenzene
0.1000 µg/L 10%
of the EPA limit 1 µg/L
1/3 SYR4
Hexachlorocyclopentadiene
0.1000 µg/L 0.2%
of the EPA limit 50 µg/L
1/3 SYR4
Picloram
0.1000 µg/L 0%
of the EPA limit 500 µg/L
1/3 SYR4
Simazine
0.0700 µg/L 1.8%
of the EPA limit 4 µg/L
1/3 SYR4
Methoxychlor
0.0500 µg/L 0.1%
of the EPA limit 40 µg/L
1/3 SYR4
Pentachlorophenol
0.0400 µg/L 4%
of the EPA limit 1 µg/L
1/3 SYR4
Benzo(A)Pyrene
0.0200 µg/L 10%
of the EPA limit 0.2000 µg/L
1/3 SYR4
Bhc-Gamma
0.0100 µg/L 5%
of the EPA limit 0.2000 µg/L
1/3 SYR4
Chlordane
0.0100 µg/L 0.5%
of the EPA limit 2 µg/L
1/3 SYR4
Endrin
0.0100 µg/L 0.5%
of the EPA limit 2 µg/L
1/3 SYR4
Heptachlor
0.0100 µg/L 2.5%
of the EPA limit 0.4000 µg/L
1/3 SYR4
Heptachlor Epoxide
0.0100 µg/L 5%
of the EPA limit 0.2000 µg/L
1/3 SYR4
Lead
0.0016 mg/L 11%
of the EPA limit 0.0150 mg/L
3/3 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Fort Meade

Frequently asked questions about Fort Meade tap water

Is Fort Meade tap water safe to drink?

EPA testing detected 42 contaminants in the water serving Fort Meade. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Fort Meade?

3 public water suppliers report drinking-water monitoring for Fort Meade, Florida to the EPA. Each is listed above with its population served.

What contaminants are in Fort Meade's water?

The contaminants EPA monitoring detected in Fort Meade include Nitrate, Fluoride, Nitrite, Total Haloacetic Acids (HAA5), TTHM. The full list, with the highest level found and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.