Tap WaterIndex

← Vermont

Tap water quality report

Derby Mhp

EPA monitoring tested this supplier for 14 contaminants and detected 10. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

14
contaminants tested
10
detected
265
people served
0
health-based violations
Vermont rankingsLead in VermontPFAS in Vermont
Water source
SWP
Ownership
State government
Counties served
Orleans

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
20
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2014-04-01 → 2014-06-30
MR Monitoring Resolved 2014-04-01 → 2014-06-30
MR Monitoring Resolved 2014-04-01 → 2014-06-30
MR Monitoring Resolved 2014-04-01 → 2014-06-30
MR Monitoring Resolved 2013-09-01 → 2013-09-30
MR Monitoring Resolved 2013-09-01 → 2013-09-30
MR Monitoring Resolved 2013-09-01 → 2013-09-30
MR Monitoring Resolved 2013-09-01 → 2013-09-30
MR Monitoring Resolved 2013-07-01 → 2013-09-30
MR Monitoring Resolved 2013-07-01 → 2013-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Lead
0.00060 mg/L 4%
of the EPA limit 0.0150 mg/L
 11/11 LCR 2025
Copper
120 µg/L 9.2%
of the EPA limit 1300 µg/L
 8/15 SYR4 2013–2019
Bromodichloromethane
4.8 µg/L
No EPA limit set
 6/6 SYR4 2014–2019
Chloroform
13.6 µg/L
No EPA limit set
 6/6 SYR4 2014–2019
Dibromochloromethane
1.7 µg/L
No EPA limit set
 6/6 SYR4 2014–2019
Lead
4 µg/L 27%
of the EPA limit 15 µg/L
 6/15 SYR4 2013–2019
TTHM
19.8 µg/L 25%
of the EPA limit 80 µg/L
 6/6 SYR4 2014–2019
Dichloroacetic Acid
10 µg/L
No EPA limit set
 5/6 SYR4 2014–2019
Trichloroacetic Acid
7.7 µg/L
No EPA limit set
 5/6 SYR4 2014–2019
Total Haloacetic Acids (HAA5)
17.7 µg/L 30%
of the EPA limit 60 µg/L
 4/6 SYR4 2014–2019
4 contaminants tested, none detected
BromoformDibromoacetic AcidMonobromoacetic AcidMonochloroacetic Acid

Utility contact

Contact
KIPP, ADAM
Phone
802-828-1183
Email
adam.kipp@VSHA.ORG

Frequently asked questions about Derby Mhp

Is Derby Mhp tap water safe to drink?

EPA monitoring detected 10 contaminants in Derby Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Derby Mhp's water?

EPA monitoring detected Lead, Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.

How many people does Derby Mhp serve?

Derby Mhp reports serving 265 people in Vermont, per its EPA record.

Has Derby Mhp had any water quality violations?

The EPA has 20 violations on file for Derby Mhp, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.