Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 394 µg/L 30% of the EPA limit 1300 µg/L | 26/27 | SYR4 | 2013–2019 |
| Bromodichloromethane | 34.6 µg/L No EPA limit set | 23/23 | SYR4 | 2013–2019 |
| Bromoform | 6.5 µg/L No EPA limit set | 23/23 | SYR4 | 2013–2019 |
| Chloroform | 28.1 µg/L No EPA limit set | 23/23 | SYR4 | 2013–2019 |
| Dibromochloromethane | 31.9 µg/L No EPA limit set | 23/23 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 6 µg/L No EPA limit set | 18/18 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 10.9 µg/L No EPA limit set | 18/18 | SYR4 | 2013–2019 |
| Lead | 7.3 µg/L 49% of the EPA limit 15 µg/L | 18/27 | SYR4 | 2013–2019 |
| TTHM | 93.8 µg/L 117% of the EPA limit, in the worst sample — 80 µg/L | 18/18 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 28.3 µg/L 47% of the EPA limit 60 µg/L | 18/18 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 15.3 µg/L No EPA limit set | 18/18 | SYR4 | 2013–2019 |
| Lead | 0.0042 mg/L 28% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2025 |
| Barium | 64.5 µg/L 3.2% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2013–2019 |
| Fluoride | 770 µg/L 19% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 2/2 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 2 µg/L No EPA limit set | 2/18 | SYR4 | 2013–2019 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Evergreen Park Hickory Hills Water Syste
Is Evergreen Park Hickory Hills Water Syste tap water safe to drink?
EPA monitoring detected 16 contaminants in Evergreen Park Hickory Hills Water Syste's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Evergreen Park Hickory Hills Water Syste's water?
EPA monitoring detected Copper, Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Evergreen Park Hickory Hills Water Syste serve?
Evergreen Park Hickory Hills Water Syste reports serving 363 people in Texas, per its EPA record.
Has Evergreen Park Hickory Hills Water Syste had any water quality violations?
The EPA has 107 violations on file for Evergreen Park Hickory Hills Water Syste, of which 23 are health-based (a contaminant limit or required treatment was breached) and 6 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.