Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
0
health-based violations
45
violations on file
0
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| RPT | Monitoring | Resolved | 2025-07-02 |
| MON | Monitoring | Resolved | 2025-05-01 → 2025-05-31 |
| MON | Monitoring | Resolved | 2025-05-01 → 2025-05-31 |
| MON | Monitoring | Resolved | 2025-05-01 → 2025-05-31 |
| MR | Monitoring | Resolved | 2025-04-01 |
| MR | Monitoring | Resolved | 2025-04-01 |
| MR | Monitoring | Resolved | 2024-09-29 |
| MR | Monitoring | Resolved | 2024-09-29 |
| MR | Monitoring | Resolved | 2024-09-29 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-03-31 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 889 µg/L 68% of the EPA limit 1300 µg/L
worst single sample: 1100 µg/L | 63/66 | SYR4 | 2012–2019 |
| Chloroform | 12.99 µg/L No EPA limit set
worst single sample: 20.3 µg/L | 59/73 | SYR4 | 2012–2019 |
| Bromodichloromethane | 13.42 µg/L No EPA limit set
worst single sample: 22.9 µg/L | 54/73 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 27.425 µg/L 46% of the EPA limit 60 µg/L
worst single sample: 40 µg/L | 54/54 | SYR4 | 2012–2019 |
| TTHM | 40.15 µg/L 50% of the EPA limit 80 µg/L
worst single sample: 62.2 µg/L | 51/54 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 16.26 µg/L No EPA limit set
worst single sample: 20.4 µg/L | 49/54 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 9.54 µg/L No EPA limit set
worst single sample: 11.1 µg/L | 47/54 | SYR4 | 2012–2019 |
| Dibromochloromethane | 10.665 µg/L No EPA limit set
worst single sample: 16.1 µg/L | 44/73 | SYR4 | 2012–2019 |
| Bromoform | 5.92 µg/L No EPA limit set
worst single sample: 7.5 µg/L | 34/73 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 7.82 µg/L No EPA limit set
worst single sample: 12.4 µg/L | 33/54 | SYR4 | 2012–2019 |
| Nitrate | 1157 µg/L 12% of the EPA limit 10000 µg/L
worst single sample: 1290 µg/L | 28/62 | SYR4 | 2012–2019 |
| Lead | 0.0023 mg/L 15% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2024 |
| Lead | 2 µg/L 13% of the EPA limit 15 µg/L
worst single sample: 2.3 µg/L | 13/66 | SYR4 | 2012–2019 |
| Lithium | 44 µg/L No EPA limit set | 11/12 | UCMR-5 | 2023 |
| Barium | 240.6 µg/L 12% of the EPA limit 2000 µg/L
worst single sample: 245 µg/L | 9/9 | SYR4 | 2012–2019 |
| Atrazine | 0.6065 µg/L 20% of the EPA limit 3 µg/L
worst single sample: 0.6800 µg/L | 8/23 | SYR4 | 2012–2019 |
| Fluoride | 723 µg/L 18% of the EPA limit 4000 µg/L
worst single sample: 730 µg/L | 8/9 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1095 µg/L 11% of the EPA limit 10000 µg/L
worst single sample: 1290 µg/L | 7/8 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 3.65 µg/L No EPA limit set
worst single sample: 4.1 µg/L | 4/54 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 3/3 | SYR4 | 2012–2018 |
| Nitrite | 29 µg/L 2.9% of the EPA limit 1000 µg/L
worst single sample: 30 µg/L | 3/10 | SYR4 | 2012–2019 |
| Cyanide | 67.5 µg/L 34% of the EPA limit 200 µg/L
worst single sample: 70 µg/L | 2/9 | SYR4 | 2013–2019 |
| Arsenic | 2.1 µg/L 21% of the EPA limit 10 µg/L | 1/9 | SYR4 | 2012–2019 |
| Combined Uranium | 1.5 µg/L 5% of the EPA limit 30 µg/L | 1/6 | SYR4 | 2015–2019 |
| Di(2-ethylhexyl) Phthalate | 1.9 µg/L 32% of the EPA limit 6 µg/L | 1/23 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 6.4 µg/L No EPA limit set | 1/54 | SYR4 | 2012–2019 |
| Selenium | 4.2 µg/L 8.4% of the EPA limit 50 µg/L | 1/9 | SYR4 | 2012–2019 |
| Simazine | 0.0700 µg/L 1.8% of the EPA limit 4 µg/L | 1/23 | SYR4 | 2012–2019 |
75 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNmefosaaOxamylPfdaPfdoaPfeesaPfhpaPfhpsPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpesPftaPftrdaPfunaPentachlorophenolPicloramStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about City of Richwood
Is City of Richwood tap water safe to drink?
EPA monitoring detected 34 contaminants in City of Richwood's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Richwood's water?
EPA monitoring detected Copper, Chloroform, Bromodichloromethane, Total Haloacetic Acids (HAA5), TTHM, and others. The full list with the level and data source for each is above.
How many people does City of Richwood serve?
City of Richwood reports serving 7,605 people in Texas, per its EPA record.
Has City of Richwood had any water quality violations?
The EPA has 45 violations on file for City of Richwood, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.