Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2003-02-01 → 2003-02-28 |
| TT | Health-based | Resolved | 2003-02-01 → 2003-02-28 |
| TT | Health-based | Resolved | 2003-01-01 → 2003-01-31 |
| TT | Health-based | Resolved | 2003-01-01 → 2003-01-31 |
| MON | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MON | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MON | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MON | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MR | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MR | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0132 µg/L | 2/16 | 2023 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 783.15 µg/L 60% of the EPA limit 1300 µg/L
worst single sample: 1240 µg/L | 80/80 | SYR4 | 2013–2019 |
| Bromodichloromethane | 5.472 µg/L No EPA limit set
worst single sample: 8.93 µg/L | 67/67 | SYR4 | 2012–2019 |
| TTHM | 61.95 µg/L 77% of the EPA limit 80 µg/L
worst single sample: 93.7 µg/L | 66/67 | SYR4 | 2012–2019 |
| Chloroform | 57.84 µg/L No EPA limit set
worst single sample: 84.8 µg/L | 65/67 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 59.97 µg/L 100% of the EPA limit 60 µg/L
worst single sample: 78 µg/L | 63/66 | SYR4 | 2012–2019 |
| Lead | 0.0044 mg/L 29% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Dichloroacetic Acid | 31.85 µg/L No EPA limit set
worst single sample: 39 µg/L | 12/12 | SYR4 | 2015–2019 |
| Trichloroacetic Acid | 29.05 µg/L No EPA limit set
worst single sample: 34 µg/L | 12/12 | SYR4 | 2015–2019 |
| Dibromochloromethane | 17.8385 µg/L No EPA limit set
worst single sample: 30.2 µg/L | 10/67 | SYR4 | 2012–2019 |
| Barium | 27 µg/L 1.4% of the EPA limit 2000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 27.4 µg/L No EPA limit set
worst single sample: 31 µg/L | 7/12 | SYR4 | 2015–2019 |
| Lead | 16.89 µg/L 113% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 17.2 µg/L | 2/60 | SYR4 | 2013–2019 |
| Nitrate | 2300 µg/L 23% of the EPA limit 10000 µg/L | 2/16 | SYR4 | 2012–2019 |
| Mercury | 0.3700 µg/L 19% of the EPA limit 2 µg/L | 1/8 | SYR4 | 2012–2019 |
93 contaminants tested, none detected
Utility contact
Frequently asked questions about Conemaugh Twp Muni Auth
Is Conemaugh Twp Muni Auth tap water safe to drink?
EPA monitoring detected 15 contaminants in Conemaugh Twp Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Conemaugh Twp Muni Auth's water?
EPA monitoring detected Copper, Bromodichloromethane, TTHM, Chloroform, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Conemaugh Twp Muni Auth serve?
Conemaugh Twp Muni Auth reports serving 7,800 people in Pennsylvania, per its EPA record.
Has Conemaugh Twp Muni Auth had any water quality violations?
The EPA has 577 violations on file for Conemaugh Twp Muni Auth, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.