Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2012-07-01 → 2012-09-30 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-09-30 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-09-30 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-09-30 |
| MCL | Health-based | Resolved | 2012-01-01 → 2012-03-31 |
| MCL | Health-based | Resolved | 2012-01-01 → 2012-03-31 |
| MCL | Health-based | Resolved | 2012-01-01 → 2012-03-31 |
| MCL | Health-based | Resolved | 2012-01-01 → 2012-03-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chlorite | 800 µg/L 80% of the EPA limit 1000 µg/L | 296/300 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 99 µg/L 165% of the EPA limit, in the worst sample — 60 µg/L | 94/94 | SYR4 | 2012–2019 |
| TTHM | 128 µg/L 160% of the EPA limit, in the worst sample — 80 µg/L | 90/90 | SYR4 | 2012–2019 |
| Copper | 238 µg/L 18% of the EPA limit 1300 µg/L | 43/49 | SYR4 | 2012–2019 |
| Fluoride | 900 µg/L 23% of the EPA limit 4000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Barium | 30 µg/L 1.5% of the EPA limit 2000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Arsenic | 0.5000 µg/L 5% of the EPA limit 10 µg/L | 2/8 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 4.4 pCi/L 88% of the EPA limit 5 pCi/L | 2/2 | SYR4 | 2014–2017 |
| Lead | 4 µg/L 27% of the EPA limit 15 µg/L | 2/41 | SYR4 | 2014–2017 |
| Nitrate | 200 µg/L 2% of the EPA limit 10000 µg/L | 2/16 | SYR4 | 2012–2019 |
| Cyanide | 40 µg/L 20% of the EPA limit 200 µg/L | 1/8 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Adipate | 0.3000 µg/L 0.1% of the EPA limit 400 µg/L | 1/6 | SYR4 | 2012–2018 |
| Mercury | 0.2000 µg/L 10% of the EPA limit 2 µg/L | 1/8 | SYR4 | 2012–2019 |
85 contaminants tested, none detected
Utility contact
Frequently asked questions about Dawson Springs Water & Sewer
Is Dawson Springs Water & Sewer tap water safe to drink?
EPA monitoring detected 14 contaminants in Dawson Springs Water & Sewer's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Dawson Springs Water & Sewer's water?
EPA monitoring detected Chlorite, Total Haloacetic Acids (HAA5), TTHM, Copper, Fluoride, and others. The full list with the level and data source for each is above.
How many people does Dawson Springs Water & Sewer serve?
Dawson Springs Water & Sewer reports serving 2,631 people in Kentucky, per its EPA record.
Has Dawson Springs Water & Sewer had any water quality violations?
The EPA has 210 violations on file for Dawson Springs Water & Sewer, of which 110 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.