Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-07-01 → 2025-07-31 |
| TT | Health-based | Resolved | 2025-07-01 → 2025-07-31 |
| TT | Health-based | Resolved | 2025-07-01 → 2025-07-31 |
| TT | Health-based | Resolved | 2025-07-01 → 2025-07-31 |
| TT | Health-based | Resolved | 2022-02-01 → 2022-02-28 |
| TT | Health-based | Resolved | 2022-02-01 → 2022-02-28 |
| TT | Health-based | Resolved | 2022-02-01 → 2022-02-28 |
| TT | Health-based | Resolved | 2022-02-01 → 2022-02-28 |
| TT | Health-based | Resolved | 2022-02-01 → 2022-02-28 |
| TT | Health-based | Resolved | 2022-02-01 → 2022-02-28 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 144.9 µg/L 181% of the EPA limit, in the worst sample — 80 µg/L | 78/78 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 201.2 µg/L 335% of the EPA limit, in the worst sample — 60 µg/L | 78/78 | SYR4 | 2012–2019 |
| Copper | 797 µg/L 61% of the EPA limit 1300 µg/L | 20/20 | SYR4 | 2017 |
| Atrazine | 2.01 µg/L 67% of the EPA limit 3 µg/L | 16/32 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Nitrate | 1090 µg/L 11% of the EPA limit 10000 µg/L | 16/18 | SYR4 | 2012–2019 |
| Fluoride | 680 µg/L 17% of the EPA limit 4000 µg/L | 6/6 | SYR4 | 2012–2019 |
| Lead | 8 µg/L 53% of the EPA limit 15 µg/L | 5/20 | SYR4 | 2017 |
| Arsenic | 1.1 µg/L 11% of the EPA limit 10 µg/L | 3/7 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.7 µg/L No EPA limit set | 3/3 | SYR4 | 2012–2014 |
| Chloroform | 20.6 µg/L No EPA limit set | 3/3 | SYR4 | 2012–2014 |
| Di(2-ethylhexyl) Phthalate | 2.28 µg/L 38% of the EPA limit 6 µg/L | 3/32 | SYR4 | 2012–2019 |
| Antimony, Total | 0.4000 µg/L 6.7% of the EPA limit 6 µg/L | 2/7 | SYR4 | 2012–2019 |
| Chromium | 3 µg/L 3% of the EPA limit 100 µg/L | 2/7 | SYR4 | 2012–2019 |
| Barium | 164 µg/L 8.2% of the EPA limit 2000 µg/L | 1/7 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Adipate | 0.6000 µg/L 0.2% of the EPA limit 400 µg/L | 1/32 | SYR4 | 2012–2019 |
| Dibromochloromethane | 0.6000 µg/L No EPA limit set | 1/3 | SYR4 | 2012–2014 |
| Gross Alpha, Excl. Radon And U | 0.0900 pCi/L 0.6% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2019 |
| Methoxychlor | 0.3100 µg/L 0.8% of the EPA limit 40 µg/L | 1/26 | SYR4 | 2012–2018 |
84 contaminants tested, none detected
Utility contact
Frequently asked questions about Salem Water Works
Is Salem Water Works tap water safe to drink?
EPA monitoring detected 19 contaminants in Salem Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Salem Water Works's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Atrazine, Lead, and others. The full list with the level and data source for each is above.
How many people does Salem Water Works serve?
Salem Water Works reports serving 8,200 people in Indiana, per its EPA record.
Has Salem Water Works had any water quality violations?
The EPA has 646 violations on file for Salem Water Works, of which 346 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.