Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-04-29 |
| TT | Health-based | Resolved | 2025-04-29 |
| TT | Health-based | Resolved | 2025-04-29 |
| MCL | Health-based | Resolved | 2012-08-01 → 2012-08-31 |
| MCL | Health-based | Resolved | 2012-08-01 → 2012-08-31 |
| MCL | Health-based | Resolved | 2012-08-01 → 2012-08-31 |
| MCL | Health-based | Resolved | 2012-08-01 → 2012-08-31 |
| MCL | Health-based | Resolved | 2012-08-01 → 2012-08-31 |
| MCL | Health-based | Resolved | 1999-03-01 → 1999-03-31 |
| MCL | Health-based | Resolved | 1999-03-01 → 1999-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0145 mg/L 97% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2027 |
| Copper | 519 µg/L 40% of the EPA limit 1300 µg/L | 7/10 | SYR4 | 2018 |
| Barium | 410 µg/L 21% of the EPA limit 2000 µg/L | 6/6 | SYR4 | 2012–2018 |
| Bromodichloromethane | 7.5 µg/L No EPA limit set | 5/9 | SYR4 | 2012–2019 |
| Chloroform | 9 µg/L No EPA limit set | 5/9 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.9 µg/L No EPA limit set | 5/9 | SYR4 | 2012–2019 |
| Fluoride | 400 µg/L 10% of the EPA limit 4000 µg/L | 5/5 | SYR4 | 2012–2018 |
| Gross Alpha, Excl. Radon And U | 2.5 pCi/L 17% of the EPA limit 15 pCi/L | 5/5 | SYR4 | 2018 |
| TTHM | 8.9 µg/L 11% of the EPA limit 80 µg/L | 5/8 | SYR4 | 2012–2017 |
| Lead | 4.1 µg/L 27% of the EPA limit 15 µg/L | 4/10 | SYR4 | 2018 |
| Bromoform | 1.7 µg/L No EPA limit set | 3/9 | SYR4 | 2012–2019 |
| Lithium | 41.5 µg/L No EPA limit set | 3/3 | UCMR-5 | 2025 |
| Chromium | 21 µg/L 21% of the EPA limit 100 µg/L | 2/6 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 3.9 µg/L 6.5% of the EPA limit 60 µg/L | 2/8 | SYR4 | 2012–2017 |
| Di(2-ethylhexyl) Adipate | 0.7000 µg/L 0.2% of the EPA limit 400 µg/L | 1/10 | SYR4 | 2012–2018 |
| Di(2-ethylhexyl) Phthalate | 2.1 µg/L 35% of the EPA limit 6 µg/L | 1/10 | SYR4 | 2012–2018 |
| Pentachlorophenol | 0.1400 µg/L 14% of the EPA limit 1 µg/L | 1/9 | SYR4 | 2012–2018 |
| Xylenes, Total | 2.3 µg/L 0% of the EPA limit 10000 µg/L | 1/9 | SYR4 | 2012–2019 |
85 contaminants tested, none detected
Utility contact
Frequently asked questions about Cedar Lake Water Works
Is Cedar Lake Water Works tap water safe to drink?
EPA monitoring detected 18 contaminants in Cedar Lake Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cedar Lake Water Works's water?
EPA monitoring detected Lead, Copper, Barium, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Cedar Lake Water Works serve?
Cedar Lake Water Works reports serving 4,600 people in Indiana, per its EPA record.
Has Cedar Lake Water Works had any water quality violations?
The EPA has 468 violations on file for Cedar Lake Water Works, of which 11 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.