← Texas

Tap water quality report

Cut and Shoot, TX

EPA monitoring detected 13 contaminants across the 1 water supplier serving Cut and Shoot. A detection doesn't automatically mean the water is unsafe — see the level at the main supplier for each below, with its EPA source and period.

1
water supplier
6,000
people served
13
contaminants found

What was found in Cut and Shoot's water

The level at the city's main supplier, the highest level anywhere in the city, the EPA limit for each, and where every figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Fluoride
325 µg/L 8.1%
of the EPA limit 4000 µg/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2018
1/1 SYR4
Barium
265 µg/L 13%
of the EPA limit 2000 µg/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2018
1/1 SYR4
Copper
89.6 µg/L 6.9%
of the EPA limit 1300 µg/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2017
1/1 SYR4
Nitrate
40 µg/L 0.4%
of the EPA limit 10000 µg/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2019
1/1 SYR4
Lithium
33.3 µg/L
No EPA limit set
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2023
1/1 UCMR-5
Nitrate-Nitrite
29 µg/L 0.3%
of the EPA limit 10000 µg/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2019
1/1 SYR4
Gross Beta Particle Activity
8.8 pCi/L
No EPA limit set
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2018
1/1 SYR4
Gross Alpha, Excl. Radon And U
5.38 pCi/L 36%
of the EPA limit 15 pCi/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2018
1/1 SYR4
Arsenic
4.17 µg/L 42%
of the EPA limit 10 µg/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2018
1/1 SYR4
Combined Radium (-226 And -228)
3.38 pCi/L 68%
of the EPA limit 5 pCi/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2018
1/1 SYR4
Lead
2.52 µg/L 17%
of the EPA limit 15 µg/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2017
1/1 SYR4
Di(2-ethylhexyl) Phthalate
0.8400 µg/L 14%
of the EPA limit 6 µg/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2019
1/1 SYR4
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
Main supplier: TOWN OF CUT AND SHOOT · 6,000 people · 2025
1/1 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of the system's samples — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Cut and Shoot

SupplierPopulation served
TOWN OF CUT AND SHOOT 6,000

Frequently asked questions about Cut and Shoot tap water

Is Cut and Shoot tap water safe to drink?

EPA testing detected 13 contaminants in the water serving Cut and Shoot. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Cut and Shoot?

1 public water supplier report drinking-water monitoring for Cut and Shoot, Texas to the EPA. Each is listed above with its population served.

What contaminants are in Cut and Shoot's water?

The contaminants EPA monitoring detected in Cut and Shoot include Fluoride, Barium, Copper, Nitrate, Lithium. The full list, with the level at the main supplier and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.