← Pennsylvania

Tap water quality report

Sellersville, PA

EPA monitoring detected 39 contaminants across the 3 water suppliers serving Sellersville. A detection doesn't automatically mean the water is unsafe — see the highest level found for each below, with its EPA source and period.

3
water suppliers
21,070
people served
39
contaminants found

What was found in Sellersville's water

The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Nitrate
1650 µg/L 17%
of the EPA limit 10000 µg/L
2/3 SYR4
Fluoride
1400 µg/L 35%
of the EPA limit 4000 µg/L
2/3 SYR4
Copper
1100 µg/L 85%
of the EPA limit 1300 µg/L
3/3 SYR4
Barium
200 µg/L 10%
of the EPA limit 2000 µg/L
2/3 SYR4
Tetrachloroethylene
84 µg/L 1680%
of the EPA limit, in the worst sample — 5 µg/L
1/3 SYR4
1,1-Dichloroethylene
77 µg/L 1100%
of the EPA limit, in the worst sample — 7 µg/L
1/3 SYR4
Trichloroethylene
74.1 µg/L 1482%
of the EPA limit, in the worst sample — 5 µg/L
1/3 SYR4
TTHM
60.8 µg/L 76%
of the EPA limit 80 µg/L
3/3 SYR4
Chloroform
43.7 µg/L
No EPA limit set
3/3 SYR4
cis-1,2-Dichloroethylene
29.6 µg/L 42%
of the EPA limit 70 µg/L
1/3 SYR4
Lead
25 µg/L 167%
of the EPA limit, in the worst sample — 15 µg/L
3/3 SYR4
Total Haloacetic Acids (HAA5)
23 µg/L 38%
of the EPA limit 60 µg/L
3/3 SYR4
Lithium
22.7 µg/L
No EPA limit set
2/3 UCMR-5
Arsenic
20.1 µg/L 201%
of the EPA limit, in the worst sample — 10 µg/L
2/3 SYR4
Bromodichloromethane
17.9 µg/L
No EPA limit set
3/3 SYR4
Dichloroacetic Acid
11.8 µg/L
No EPA limit set
3/3 SYR4
Dibromochloromethane
11.5 µg/L
No EPA limit set
3/3 SYR4
Trichloroacetic Acid
11.2 µg/L
No EPA limit set
3/3 SYR4
Combined Uranium
10.88147 µg/L 36%
of the EPA limit 30 µg/L
2/3 SYR4
Cyanide
8 µg/L 4%
of the EPA limit 200 µg/L
1/3 SYR4
Selenium
5 µg/L 10%
of the EPA limit 50 µg/L
1/3 SYR4
1,1,1-Trichloroethane
4.6 µg/L 2.3%
of the EPA limit 200 µg/L
1/3 SYR4
Chromium
3.6 µg/L 3.6%
of the EPA limit 100 µg/L
2/3 SYR4
Bromoform
3.45 µg/L
No EPA limit set
3/3 SYR4
Dibromoacetic Acid
3.4 µg/L
No EPA limit set
2/3 SYR4
Dichloromethane
2 µg/L 40%
of the EPA limit 5 µg/L
1/3 SYR4
Carbon Tetrachloride
0.5000 µg/L 10%
of the EPA limit 5 µg/L
1/3 SYR4
Thallium, Total
0.2400 µg/L 12%
of the EPA limit 2 µg/L
1/3 SYR4
Antimony, Total
0.2300 µg/L 3.8%
of the EPA limit 6 µg/L
1/3 SYR4
Cadmium
0.1100 µg/L 2.2%
of the EPA limit 5 µg/L
1/3 SYR4
Mercury
0.0780 µg/L 3.9%
of the EPA limit 2 µg/L
1/3 SYR4
Beryllium, Total
0.0700 µg/L 1.8%
of the EPA limit 4 µg/L
1/3 SYR4
PFOS
0.0176 µg/L
No EPA limit set
2/3 UCMR-5
PFOA
0.0080 µg/L
No EPA limit set
2/3 UCMR-5
Pfpea
0.0066 µg/L
No EPA limit set
1/3 UCMR-5
PFBS
0.0057 µg/L
No EPA limit set
2/3 UCMR-5
Pfhxa
0.0055 µg/L
No EPA limit set
1/3 UCMR-5
PFHXS
0.0051 µg/L
No EPA limit set
1/3 UCMR-5
Lead
0.0025 mg/L 17%
of the EPA limit 0.0150 mg/L
2/3 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Sellersville

Frequently asked questions about Sellersville tap water

Is Sellersville tap water safe to drink?

EPA testing detected 39 contaminants in the water serving Sellersville. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Sellersville?

3 public water suppliers report drinking-water monitoring for Sellersville, Pennsylvania to the EPA. Each is listed above with its population served.

What contaminants are in Sellersville's water?

The contaminants EPA monitoring detected in Sellersville include Nitrate, Fluoride, Copper, Barium, Tetrachloroethylene. The full list, with the highest level found and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.