What was found in Franklin's water
The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.
| Contaminant | Level vs EPA limit | Suppliers | Source |
|---|---|---|---|
| Copper | 2200 µg/L 169% of the EPA limit, in the worst sample — 1300 µg/L | 2/2 | SYR4 |
| Nitrate-Nitrite | 1200 µg/L 12% of the EPA limit 10000 µg/L | 2/2 | SYR4 |
| Barium | 290 µg/L 14% of the EPA limit 2000 µg/L | 2/2 | SYR4 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 2/2 | SYR4 |
| TTHM | 175.6 µg/L 219% of the EPA limit, in the worst sample — 80 µg/L | 2/2 | SYR4 |
| Lead | 127 µg/L 847% of the EPA limit, in the worst sample — 15 µg/L | 2/2 | SYR4 |
| Total Haloacetic Acids (HAA5) | 116 µg/L 193% of the EPA limit, in the worst sample — 60 µg/L | 2/2 | SYR4 |
| Chloroform | 94 µg/L No EPA limit set | 2/2 | SYR4 |
| Dichloroacetic Acid | 63.1 µg/L No EPA limit set | 2/2 | SYR4 |
| Nitrate | 61 µg/L 0.6% of the EPA limit 10000 µg/L | 1/2 | SYR4 |
| Bromodichloromethane | 59 µg/L No EPA limit set | 2/2 | SYR4 |
| Trichloroacetic Acid | 48 µg/L No EPA limit set | 2/2 | SYR4 |
| Dibromochloromethane | 38.7 µg/L No EPA limit set | 2/2 | SYR4 |
| Dalapon | 38.27 µg/L 19% of the EPA limit 200 µg/L | 1/2 | SYR4 |
| Monochloroacetic Acid | 31.3 µg/L No EPA limit set | 2/2 | SYR4 |
| Dibromoacetic Acid | 13 µg/L No EPA limit set | 2/2 | SYR4 |
| Monobromoacetic Acid | 7.9 µg/L No EPA limit set | 2/2 | SYR4 |
| Cyanide | 7.5 µg/L 3.8% of the EPA limit 200 µg/L | 1/2 | SYR4 |
| Bromoform | 6.8 µg/L No EPA limit set | 1/2 | SYR4 |
| Gross Beta Particle Activity | 3.79 pCi/L No EPA limit set | 2/2 | SYR4 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 2/2 | SYR4 |
| Combined Radium (-226 And -228) | 1.694 pCi/L 34% of the EPA limit 5 pCi/L | 2/2 | SYR4 |
| Carbon Tetrachloride | 1.31 µg/L 26% of the EPA limit 5 µg/L | 1/2 | SYR4 |
| Di(2-ethylhexyl) Phthalate | 1.02 µg/L 17% of the EPA limit 6 µg/L | 2/2 | SYR4 |
| Xylenes, Total | 0.7200 µg/L 0% of the EPA limit 10000 µg/L | 1/2 | SYR4 |
| Selenium | 0.5900 µg/L 1.2% of the EPA limit 50 µg/L | 1/2 | SYR4 |
| Atrazine | 0.4100 µg/L 14% of the EPA limit 3 µg/L | 1/2 | SYR4 |
| 2,4-D | 0.1400 µg/L 0.2% of the EPA limit 70 µg/L | 1/2 | SYR4 |
| Hexachlorocyclopentadiene | 0.1400 µg/L 0.3% of the EPA limit 50 µg/L | 1/2 | SYR4 |
| Pfba | 0.0060 µg/L No EPA limit set | 1/2 | UCMR-5 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 2/2 | LCR |
Water suppliers serving Franklin
| Supplier | Population served |
|---|---|
| CITY OF FRANKLIN WATER SUPPLY | 8,325 |
| PORT OF WEST ST MARY | 400 |
Frequently asked questions about Franklin tap water
Is Franklin tap water safe to drink?
EPA testing detected 31 contaminants in the water serving Franklin. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.
How many water suppliers serve Franklin?
2 public water suppliers report drinking-water monitoring for Franklin, Louisiana to the EPA. Each is listed above with its population served.
What contaminants are in Franklin's water?
The contaminants EPA monitoring detected in Franklin include Copper, Nitrate-Nitrite, Barium, Fluoride, TTHM. The full list, with the highest level found and the data source, is in the table above.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.