What was found in Monroe's water
The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.
| Contaminant | Level vs EPA limit | Suppliers | Source |
|---|---|---|---|
| Copper | 1200 µg/L 92% of the EPA limit 1300 µg/L | 2/2 | SYR4 |
| Fluoride | 720 µg/L 18% of the EPA limit 4000 µg/L | 2/2 | SYR4 |
| Nitrate-Nitrite | 190 µg/L 1.9% of the EPA limit 10000 µg/L | 1/2 | SYR4 |
| TTHM | 162.64 µg/L 203% of the EPA limit, in the worst sample — 80 µg/L | 2/2 | SYR4 |
| Chloroform | 146 µg/L No EPA limit set | 2/2 | SYR4 |
| Total Haloacetic Acids (HAA5) | 120.4 µg/L 201% of the EPA limit, in the worst sample — 60 µg/L | 2/2 | SYR4 |
| Bromoform | 88.8 µg/L No EPA limit set | 1/2 | SYR4 |
| Dichloroacetic Acid | 69.4 µg/L No EPA limit set | 2/2 | SYR4 |
| Trichloroacetic Acid | 58.9 µg/L No EPA limit set | 2/2 | SYR4 |
| Dibromochloromethane | 46.8 µg/L No EPA limit set | 2/2 | SYR4 |
| Lead | 28 µg/L 187% of the EPA limit, in the worst sample — 15 µg/L | 2/2 | SYR4 |
| Barium | 26 µg/L 1.3% of the EPA limit 2000 µg/L | 2/2 | SYR4 |
| Dibromoacetic Acid | 22.6 µg/L No EPA limit set | 2/2 | SYR4 |
| Monochloroacetic Acid | 19.3 µg/L No EPA limit set | 2/2 | SYR4 |
| Bromodichloromethane | 15.5 µg/L No EPA limit set | 2/2 | SYR4 |
| Monobromoacetic Acid | 12.1 µg/L No EPA limit set | 2/2 | SYR4 |
| Dalapon | 9.136 µg/L 4.6% of the EPA limit 200 µg/L | 2/2 | SYR4 |
| Gross Beta Particle Activity | 4 pCi/L No EPA limit set | 2/2 | SYR4 |
| Arsenic | 3 µg/L 30% of the EPA limit 10 µg/L | 2/2 | SYR4 |
| Combined Radium (-226 And -228) | 2.64 pCi/L 53% of the EPA limit 5 pCi/L | 1/2 | SYR4 |
| Atrazine | 1.13 µg/L 38% of the EPA limit 3 µg/L | 1/2 | SYR4 |
| Di(2-ethylhexyl) Phthalate | 1 µg/L 17% of the EPA limit 6 µg/L | 2/2 | SYR4 |
| Mercury | 1 µg/L 50% of the EPA limit 2 µg/L | 1/2 | SYR4 |
| Carbon Tetrachloride | 0.9800 µg/L 20% of the EPA limit 5 µg/L | 1/2 | SYR4 |
| Hexachlorocyclopentadiene | 0.0670 µg/L 0.1% of the EPA limit 50 µg/L | 1/2 | SYR4 |
| Pfba | 0.0082 µg/L No EPA limit set | 1/2 | UCMR-5 |
| Lead | 0.0023 mg/L 15% of the EPA limit 0.0150 mg/L | 2/2 | LCR |
Water suppliers serving Monroe
| Supplier | Population served |
|---|---|
| CITY OF MONROE WATER SYSTEM | 57,000 |
| PRAIRIE ROAD WATER DISTRICT | 2,598 |
Frequently asked questions about Monroe tap water
Is Monroe tap water safe to drink?
EPA testing detected 27 contaminants in the water serving Monroe. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.
How many water suppliers serve Monroe?
2 public water suppliers report drinking-water monitoring for Monroe, Louisiana to the EPA. Each is listed above with its population served.
What contaminants are in Monroe's water?
The contaminants EPA monitoring detected in Monroe include Copper, Fluoride, Nitrate-Nitrite, TTHM, Chloroform. The full list, with the highest level found and the data source, is in the table above.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.