← Florida

Tap water quality report

Stuart, FL

EPA monitoring detected 40 contaminants across the 8 water suppliers serving Stuart. A detection doesn't automatically mean the water is unsafe — see the highest level found for each below, with its EPA source and period.

8
water suppliers
19,232
people served
40
contaminants found

What was found in Stuart's water

The highest level seen across the city's suppliers, the EPA limit for each, and where the figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Nitrate
1300 µg/L 13%
of the EPA limit 10000 µg/L
4/8 SYR4
Copper
1000 µg/L 77%
of the EPA limit 1300 µg/L
5/8 SYR4
Fluoride
590 µg/L 15%
of the EPA limit 4000 µg/L
5/8 SYR4
Nitrate-Nitrite
300 µg/L 3%
of the EPA limit 10000 µg/L
1/8 SYR4
TTHM
115 µg/L 144%
of the EPA limit, in the worst sample — 80 µg/L
7/8 SYR4
Total Haloacetic Acids (HAA5)
105 µg/L 175%
of the EPA limit, in the worst sample — 60 µg/L
7/8 SYR4
Nitrite
72 µg/L 7.2%
of the EPA limit 1000 µg/L
2/8 SYR4
cis-1,2-Dichloroethylene
28.3 µg/L 40%
of the EPA limit 70 µg/L
1/8 SYR4
Vinyl Chloride
24.6 µg/L 1230%
of the EPA limit, in the worst sample — 2 µg/L
1/8 SYR4
Xylenes, Total
20.3 µg/L 0.2%
of the EPA limit 10000 µg/L
2/8 SYR4
Chromium
19.8 µg/L 20%
of the EPA limit 100 µg/L
5/8 SYR4
Dichloromethane
19.5 µg/L 390%
of the EPA limit, in the worst sample — 5 µg/L
1/8 SYR4
Lead
19.3 µg/L 129%
of the EPA limit, in the worst sample — 15 µg/L
2/8 SYR4
Cyanide
17 µg/L 8.5%
of the EPA limit 200 µg/L
2/8 SYR4
Barium
10.8 µg/L 0.5%
of the EPA limit 2000 µg/L
5/8 SYR4
Arsenic
4.8 µg/L 48%
of the EPA limit 10 µg/L
2/8 SYR4
Ethylbenzene
3.34 µg/L 0.5%
of the EPA limit 700 µg/L
2/8 SYR4
1,2-Dichloroethane
1.4 µg/L 28%
of the EPA limit 5 µg/L
1/8 SYR4
O-Dichlorobenzene
1.3 µg/L 0.2%
of the EPA limit 600 µg/L
1/8 SYR4
P-Dichlorobenzene
0.9900 µg/L 1.3%
of the EPA limit 75 µg/L
1/8 SYR4
Antimony, Total
0.8000 µg/L 13%
of the EPA limit 6 µg/L
1/8 SYR4
Chloroform
0.7600 µg/L
No EPA limit set
1/8 SYR4
1,1,2-Trichloroethane
0.6300 µg/L 13%
of the EPA limit 5 µg/L
1/8 SYR4
1,2,4-Trichlorobenzene
0.4100 µg/L 0.6%
of the EPA limit 70 µg/L
1/8 SYR4
Chlorobenzene
0.2900 µg/L 0.3%
of the EPA limit 100 µg/L
1/8 SYR4
1,1,1-Trichloroethane
0.2500 µg/L 0.1%
of the EPA limit 200 µg/L
1/8 SYR4
1,1-Dichloroethylene
0.2500 µg/L 3.6%
of the EPA limit 7 µg/L
1/8 SYR4
1,2-Dichloropropane
0.2500 µg/L 5%
of the EPA limit 5 µg/L
1/8 SYR4
Benzene
0.2500 µg/L 5%
of the EPA limit 5 µg/L
1/8 SYR4
Carbon Tetrachloride
0.2500 µg/L 5%
of the EPA limit 5 µg/L
1/8 SYR4
Styrene
0.2500 µg/L 0.3%
of the EPA limit 100 µg/L
1/8 SYR4
Tetrachloroethylene
0.2500 µg/L 5%
of the EPA limit 5 µg/L
1/8 SYR4
Toluene
0.2500 µg/L 0%
of the EPA limit 1000 µg/L
1/8 SYR4
Trichloroethylene
0.2500 µg/L 5%
of the EPA limit 5 µg/L
1/8 SYR4
trans-1,2-Dichloroethylene
0.2500 µg/L 0.3%
of the EPA limit 100 µg/L
1/8 SYR4
Asbestos
0.2000 MFL 2.9%
of the EPA limit 7 MFL
1/8 SYR4
Mercury
0.1000 µg/L 5%
of the EPA limit 2 µg/L
1/8 SYR4
Lead
0.0124 mg/L 82%
of the EPA limit 0.0150 mg/L
8/8 LCR
Pfpea
0.0120 µg/L
No EPA limit set
1/8 UCMR-5
Pfhxa
0.0079 µg/L
No EPA limit set
1/8 UCMR-5
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Stuart

Frequently asked questions about Stuart tap water

Is Stuart tap water safe to drink?

EPA testing detected 40 contaminants in the water serving Stuart. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Stuart?

8 public water suppliers report drinking-water monitoring for Stuart, Florida to the EPA. Each is listed above with its population served.

What contaminants are in Stuart's water?

The contaminants EPA monitoring detected in Stuart include Nitrate, Copper, Fluoride, Nitrate-Nitrite, TTHM. The full list, with the highest level found and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.