Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2016-09-11 |
| TT | Health-based | Resolved | 2016-09-11 |
| TT | Health-based | Resolved | 2016-09-11 |
| TT | Health-based | Resolved | 2016-09-11 |
| TT | Health-based | Resolved | 2016-09-11 |
| TT | Health-based | Resolved | 2016-09-11 |
| TT | Health-based | Resolved | 2016-01-01 |
| TT | Health-based | Resolved | 2016-01-01 |
| MCL | Health-based | Resolved | 2009-11-01 → 2009-11-30 |
| MCL | Health-based | Resolved | 2009-11-01 → 2009-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 2500 µg/L 192% of the EPA limit, in the worst sample — 1300 µg/L | 30/31 | SYR4 | 2016–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 24/24 | LCR | 2027 |
| Nitrate-Nitrite | 590 µg/L 5.9% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.3 µg/L No EPA limit set | 4/4 | SYR4 | 2014–2018 |
| Dibromochloromethane | 1.3 µg/L No EPA limit set | 4/4 | SYR4 | 2014–2018 |
| Lead | 2 µg/L 13% of the EPA limit 15 µg/L | 4/31 | SYR4 | 2016–2019 |
| TTHM | 3.9 µg/L 4.9% of the EPA limit 80 µg/L | 4/4 | SYR4 | 2014–2018 |
| Chloroform | 1 µg/L No EPA limit set | 2/4 | SYR4 | 2014–2018 |
| Combined Uranium | 1.2 µg/L 4% of the EPA limit 30 µg/L | 2/2 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 0.3800 µg/L No EPA limit set | 2/2 | SYR4 | 2014–2017 |
| Fluoride | 300 µg/L 7.5% of the EPA limit 4000 µg/L | 2/2 | SYR4 | 2016–2017 |
| Total Haloacetic Acids (HAA5) | 0.3800 µg/L 0.6% of the EPA limit 60 µg/L | 2/2 | SYR4 | 2014–2017 |
| Arsenic | 1 µg/L 10% of the EPA limit 10 µg/L | 1/2 | SYR4 | 2016–2017 |
| Combined Radium (-226 And -228) | 0.8000 pCi/L 16% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2019 |
| Gross Alpha, Excl. Radon And U | 4.1 pCi/L 27% of the EPA limit 15 pCi/L | 1/2 | SYR4 | 2013–2019 |
| Thallium, Total | 0.7000 µg/L 35% of the EPA limit 2 µg/L | 1/2 | SYR4 | 2016–2017 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Hi-Country Water District
Is Hi-Country Water District tap water safe to drink?
EPA monitoring detected 16 contaminants in Hi-Country Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hi-Country Water District's water?
EPA monitoring detected Copper, Lead, Nitrate-Nitrite, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Hi-Country Water District serve?
Hi-Country Water District reports serving 85 people in Wyoming, per its EPA record.
Has Hi-Country Water District had any water quality violations?
The EPA has 55 violations on file for Hi-Country Water District, of which 15 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.