Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2025-08-13 |
| TT | Health-based | Unaddressed | 2025-08-13 |
| TT | Health-based | Unaddressed | 2025-08-13 |
| TT | Health-based | Unaddressed | 2025-08-13 |
| TT | Health-based | Unaddressed | 2025-08-13 |
| TT | Health-based | Unaddressed | 2025-08-13 |
| TT | Health-based | Unaddressed | 2025-08-13 |
| TT | Health-based | Unaddressed | 2025-08-13 |
| TT | Health-based | Unaddressed | 2025-08-13 |
| TT | Health-based | Unaddressed | 2025-08-13 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 26.8 µg/L No EPA limit set | 56/56 | SYR4 | 2012–2019 |
| Chloroform | 96.9 µg/L No EPA limit set | 56/56 | SYR4 | 2012–2019 |
| TTHM | 115.6 µg/L 144% of the EPA limit, in the worst sample — 80 µg/L | 56/56 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 31.5 µg/L No EPA limit set | 55/55 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 59.8 µg/L 100% of the EPA limit 60 µg/L | 55/55 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 31.9 µg/L No EPA limit set | 55/55 | SYR4 | 2012–2019 |
| Dibromochloromethane | 7.62 µg/L No EPA limit set | 52/56 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.19 µg/L No EPA limit set | 43/55 | SYR4 | 2012–2019 |
| Copper | 216 µg/L 17% of the EPA limit 1300 µg/L | 42/60 | SYR4 | 2012–2018 |
| Lead | 8 µg/L 53% of the EPA limit 15 µg/L | 22/60 | SYR4 | 2012–2018 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2027 |
| Nitrate | 360 µg/L 3.6% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Barium | 32.3 µg/L 1.6% of the EPA limit 2000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Fluoride | 1040 µg/L 26% of the EPA limit 4000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.67 µg/L No EPA limit set | 7/55 | SYR4 | 2012–2019 |
| Bromoform | 0.7000 µg/L No EPA limit set | 6/56 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 3.89 µg/L No EPA limit set | 2/55 | SYR4 | 2012–2019 |
| Dalapon | 1 µg/L 0.5% of the EPA limit 200 µg/L | 1/5 | SYR4 | 2013–2019 |
| Gross Alpha, Excl. Radon And U | 0.2770 pCi/L 1.8% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2013 |
| cis-1,2-Dichloroethylene | 1.05 µg/L 1.5% of the EPA limit 70 µg/L | 1/9 | SYR4 | 2012–2019 |
55 contaminants tested, none detected
Utility contact
Frequently asked questions about Wayne Water Town of
Is Wayne Water Town of tap water safe to drink?
EPA monitoring detected 20 contaminants in Wayne Water Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Wayne Water Town of's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Wayne Water Town of serve?
Wayne Water Town of reports serving 5,519 people in West Virginia, per its EPA record.
Has Wayne Water Town of had any water quality violations?
The EPA has 93 violations on file for Wayne Water Town of, of which 66 are health-based (a contaminant limit or required treatment was breached) and 44 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.