Tap water quality report

Holmen Waterworks

EPA monitoring tested this supplier for 74 contaminants and detected 22. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

74
contaminants tested
22
detected
10,147
people served
11
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
La Crosse

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

11
health-based violations
124
violations on file
2
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2016-07-26
TT Health-based Resolved 2016-07-26
TT Health-based Resolved 2016-07-26
TT Health-based Resolved 2016-07-26
MCL Health-based Resolved 2000-07-01 → 2000-07-31
MCL Health-based Resolved 2000-07-01 → 2000-07-31
MCL Health-based Resolved 2000-07-01 → 2000-07-31
MCL Health-based Resolved 2000-07-01 → 2000-07-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
6651.5 µg/L 67%
of the EPA limit 10000 µg/L
worst single sample: 7300 µg/L
200/200 SYR4 2012–2019
Fluoride
779.7 µg/L 19%
of the EPA limit 4000 µg/L
worst single sample: 1930 µg/L
82/164 SYR4 2013–2019
Copper
626.1 µg/L 48%
of the EPA limit 1300 µg/L
worst single sample: 1380 µg/L
59/59 SYR4 2014–2017
Tetrachloroethylene
4.635 µg/L 93%
of the EPA limit 5 µg/L
worst single sample: 4.92 µg/L
31/41 SYR4 2012–2019
Lead
7.3755 µg/L 49%
of the EPA limit 15 µg/L
worst single sample: 11.2 µg/L
30/59 SYR4 2014–2017
Lead
0.0028 mg/L 19%
of the EPA limit 0.0150 mg/L
14/14 LCR 2023
Total Haloacetic Acids (HAA5)
6.6525 µg/L 11%
of the EPA limit 60 µg/L
worst single sample: 7.878 µg/L
11/11 SYR4 2013–2019
Monochloroacetic Acid
5.383 µg/L
No EPA limit set
worst single sample: 5.68 µg/L
10/11 SYR4 2013–2019
Barium
75.6 µg/L 3.8%
of the EPA limit 2000 µg/L
worst single sample: 76.3 µg/L
8/8 SYR4 2014–2017
Nitrate-Nitrite
6258 µg/L 63%
of the EPA limit 10000 µg/L
worst single sample: 6300 µg/L
8/8 SYR4 2014–2017
Combined Radium (-226 And -228)
3.0975 pCi/L 62%
of the EPA limit 5 pCi/L
worst single sample: 3.1 pCi/L
6/6 SYR4 2014–2017
TTHM
8.3704 µg/L 10%
of the EPA limit 80 µg/L
worst single sample: 9.82 µg/L
5/11 SYR4 2013–2019
Bromodichloromethane
2.2416 µg/L
No EPA limit set
worst single sample: 2.49 µg/L
4/15 SYR4 2013–2019
Chloroform
3.3616 µg/L
No EPA limit set
worst single sample: 3.88 µg/L
4/15 SYR4 2013–2019
Dibromochloromethane
2.0428 µg/L
No EPA limit set
worst single sample: 2.26 µg/L
4/15 SYR4 2013–2019
Gross Alpha, Excl. Radon And U
2.685 pCi/L 18%
of the EPA limit 15 pCi/L
worst single sample: 2.7 pCi/L
4/4 SYR4 2014
Arsenic
1.95 µg/L 20%
of the EPA limit 10 µg/L
worst single sample: 2 µg/L
2/8 SYR4 2014–2017
Combined Uranium
0.8665 µg/L 2.9%
of the EPA limit 30 µg/L
worst single sample: 0.9000 µg/L
2/2 SYR4 2017
Selenium
1 µg/L 2%
of the EPA limit 50 µg/L
2/8 SYR4 2014–2017
Bromoform
1.19 µg/L
No EPA limit set
1/15 SYR4 2013–2019
Dibromoacetic Acid
0.5650 µg/L
No EPA limit set
1/11 SYR4 2013–2019
Trichloroacetic Acid
0.4030 µg/L
No EPA limit set
1/11 SYR4 2013–2019
52 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAtrazineBhc-GammaBenzeneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDichloroacetic AcidDinosebDiquatEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNitriteOxamylPentachlorophenolPicloramSimazineStyreneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Frequently asked questions about Holmen Waterworks

Is Holmen Waterworks tap water safe to drink?

EPA monitoring detected 22 contaminants in Holmen Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Holmen Waterworks's water?

EPA monitoring detected Nitrate, Fluoride, Copper, Tetrachloroethylene, Lead, and others. The full list with the level and data source for each is above.

How many people does Holmen Waterworks serve?

Holmen Waterworks reports serving 10,147 people, per its EPA record.

Has Holmen Waterworks had any water quality violations?

The EPA has 124 violations on file for Holmen Waterworks, of which 11 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.