← Wisconsin

Tap water quality report

Seneca Sanitary Dist No 1

EPA monitoring tested this supplier for 73 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

73
contaminants tested
18
detected
250
people served
18
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Crawford

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

18
health-based violations
62
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2004-12-01 → 2004-12-31
MCL Health-based Resolved 2004-12-01 → 2004-12-31
MCL Health-based Resolved 2004-12-01 → 2004-12-31
MCL Health-based Resolved 2004-12-01 → 2004-12-31
MCL Health-based Resolved 2004-12-01 → 2004-12-31
MCL Health-based Resolved 2003-07-01 → 2003-07-31
MCL Health-based Resolved 2003-07-01 → 2003-07-31
MCL Health-based Resolved 2003-07-01 → 2003-07-31
MCL Health-based Resolved 2003-07-01 → 2003-07-31
MCL Health-based Resolved 2003-07-01 → 2003-07-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
3750 µg/L 38%
of the EPA limit 10000 µg/L
16/16 SYR4 2012–2019
Lead
0.0013 mg/L 8.8%
of the EPA limit 0.0150 mg/L
14/14 LCR 2023
Copper
231 µg/L 18%
of the EPA limit 1300 µg/L
8/10 SYR4 2014–2017
Bromodichloromethane
2.69 µg/L
No EPA limit set
6/6 SYR4 2015–2019
Chloroform
1.68 µg/L
No EPA limit set
6/6 SYR4 2015–2019
Monochloroacetic Acid
121 µg/L
No EPA limit set
6/6 SYR4 2015–2019
TTHM
7.72 µg/L 9.7%
of the EPA limit 80 µg/L
6/6 SYR4 2015–2019
Total Haloacetic Acids (HAA5)
122.155 µg/L 204%
of the EPA limit, in the worst sample — 60 µg/L
6/6 SYR4 2015–2019
Dibromochloromethane
3.35 µg/L
No EPA limit set
4/6 SYR4 2015–2019
Lead
3.63 µg/L 24%
of the EPA limit 15 µg/L
4/10 SYR4 2014–2017
Barium
59 µg/L 2.9%
of the EPA limit 2000 µg/L
2/2 SYR4 2014–2017
Bromoform
1.54 µg/L
No EPA limit set
2/6 SYR4 2015–2019
Nitrate-Nitrite
3750 µg/L 38%
of the EPA limit 10000 µg/L
2/2 SYR4 2014–2017
Combined Radium (-226 And -228)
2.12 pCi/L 42%
of the EPA limit 5 pCi/L
1/1 SYR4 2014
Dibromoacetic Acid
0.9500 µg/L
No EPA limit set
1/6 SYR4 2015–2019
Fluoride
80 µg/L 2%
of the EPA limit 4000 µg/L
1/2 SYR4 2014–2017
Gross Alpha, Excl. Radon And U
1.6 pCi/L 11%
of the EPA limit 15 pCi/L
1/1 SYR4 2014
Monobromoacetic Acid
0.8450 µg/L
No EPA limit set
1/6 SYR4 2015–2019
55 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDichloroacetic AcidDinosebDiquatEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Frequently asked questions about Seneca Sanitary Dist No 1

Is Seneca Sanitary Dist No 1 tap water safe to drink?

EPA monitoring detected 18 contaminants in Seneca Sanitary Dist No 1's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Seneca Sanitary Dist No 1's water?

EPA monitoring detected Nitrate, Lead, Copper, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Seneca Sanitary Dist No 1 serve?

Seneca Sanitary Dist No 1 reports serving 250 people in Wisconsin, per its EPA record.

Has Seneca Sanitary Dist No 1 had any water quality violations?

The EPA has 62 violations on file for Seneca Sanitary Dist No 1, of which 18 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.