Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1250 µg/L 31% of the EPA limit 4000 µg/L | 100/198 | SYR4 | 2012–2019 |
| Copper | 1070 µg/L 82% of the EPA limit 1300 µg/L | 37/40 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 37.8 pCi/L 756% of the EPA limit, in the worst sample — 5 pCi/L | 31/31 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 70.52 pCi/L 470% of the EPA limit, in the worst sample — 15 pCi/L | 31/31 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 8.85 pCi/L No EPA limit set | 28/28 | SYR4 | 2012–2019 |
| Lead | 0.0063 mg/L 42% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Lead | 53.7 µg/L 358% of the EPA limit, in the worst sample — 15 µg/L | 9/40 | SYR4 | 2014–2017 |
| Combined Uranium | 1.3866667 µg/L 4.6% of the EPA limit 30 µg/L | 7/7 | SYR4 | 2013–2017 |
| TTHM | 5.8 µg/L 7.2% of the EPA limit 80 µg/L | 5/8 | SYR4 | 2013–2019 |
| Barium | 35.3 µg/L 1.8% of the EPA limit 2000 µg/L | 4/4 | SYR4 | 2014–2017 |
| Bromodichloromethane | 1.7 µg/L No EPA limit set | 3/11 | SYR4 | 2013–2019 |
| Chloroform | 3.03 µg/L No EPA limit set | 3/11 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.2 µg/L No EPA limit set | 2/11 | SYR4 | 2013–2019 |
| Nitrate | 10 µg/L 0.1% of the EPA limit 10000 µg/L | 2/12 | SYR4 | 2014–2018 |
| Monochloroacetic Acid | 0.6390 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 10 µg/L 0.1% of the EPA limit 10000 µg/L | 1/18 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 1.196 µg/L 2% of the EPA limit 60 µg/L | 1/8 | SYR4 | 2013–2019 |
| Xylenes, Total | 0.3500 µg/L 0% of the EPA limit 10000 µg/L | 1/11 | SYR4 | 2013–2019 |
87 contaminants tested, none detected
Frequently asked questions about Evansville Waterworks
Is Evansville Waterworks tap water safe to drink?
EPA monitoring detected 18 contaminants in Evansville Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Evansville Waterworks's water?
EPA monitoring detected Fluoride, Copper, Combined Radium (-226 And -228), Gross Alpha, Excl. Radon And U, Gross Beta Particle Activity, and others. The full list with the level and data source for each is above.
How many people does Evansville Waterworks serve?
Evansville Waterworks reports serving 5,703 people, per its EPA record.
Has Evansville Waterworks had any water quality violations?
The EPA has 82 violations on file for Evansville Waterworks, of which 60 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.