Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1993-08-01 → 1993-08-31 |
| MCL | Health-based | Archived | 1993-08-01 → 1993-08-31 |
| MCL | Health-based | Archived | 1992-01-01 → 1992-01-31 |
| MCL | Health-based | Archived | 1992-01-01 → 1992-01-31 |
| MCL | Health-based | Archived | 1992-01-01 → 1992-01-31 |
| MCL | Health-based | Archived | 1992-01-01 → 1992-01-31 |
| MCL | Health-based | Archived | 1991-11-01 → 1991-11-30 |
| MCL | Health-based | Archived | 1991-11-01 → 1991-11-30 |
| MCL | Health-based | Archived | 1991-11-01 → 1991-11-30 |
| MCL | Health-based | Archived | 1991-11-01 → 1991-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0012 mg/L 8% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Bromodichloromethane | 5.85 µg/L No EPA limit set
worst single sample: 6.4 µg/L | 6/6 | SYR4 | 2013–2018 |
| Bromoform | 13.55 µg/L No EPA limit set
worst single sample: 13.6 µg/L | 6/6 | SYR4 | 2013–2018 |
| Dibromochloromethane | 13.2 µg/L No EPA limit set
worst single sample: 13.9 µg/L | 6/6 | SYR4 | 2013–2018 |
| TTHM | 33.9 µg/L 42% of the EPA limit 80 µg/L
worst single sample: 35.3 µg/L | 6/6 | SYR4 | 2013–2018 |
| Chloroform | 1.82 µg/L No EPA limit set
worst single sample: 2 µg/L | 4/6 | SYR4 | 2013–2018 |
| Dibromoacetic Acid | 3.065 µg/L No EPA limit set
worst single sample: 3.2 µg/L | 4/4 | SYR4 | 2013–2018 |
| Total Haloacetic Acids (HAA5) | 3.5 µg/L 5.8% of the EPA limit 60 µg/L | 4/4 | SYR4 | 2013–2018 |
| Trichloroacetic Acid | 1.295 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 2/4 | SYR4 | 2013–2018 |
| Arsenic | 10.4 µg/L 104% of the EPA limit, at the 95th percentile of samples — 10 µg/L | 1/1 | SYR4 | 2019 |
45 contaminants tested, none detected
Utility contact
Frequently asked questions about Whidbey Shores Water
Is Whidbey Shores Water tap water safe to drink?
EPA monitoring detected 10 contaminants in Whidbey Shores Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Whidbey Shores Water's water?
EPA monitoring detected Lead, Bromodichloromethane, Bromoform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Whidbey Shores Water serve?
Whidbey Shores Water reports serving 262 people in Washington, per its EPA record.
Has Whidbey Shores Water had any water quality violations?
The EPA has 50 violations on file for Whidbey Shores Water, of which 10 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.