Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1992-06-01 → 1992-06-30 |
| MCL | Health-based | Archived | 1992-06-01 → 1992-06-30 |
| MCL | Health-based | Archived | 1992-06-01 → 1992-06-30 |
| MR | Monitoring | Resolved | 2016-07-01 → 2016-09-30 |
| MR | Monitoring | Resolved | 2016-07-01 → 2016-09-30 |
| MR | Monitoring | Resolved | 2016-07-01 → 2016-09-30 |
| MR | Monitoring | Resolved | 2016-07-01 → 2016-09-30 |
| MR | Monitoring | Resolved | 2016-07-01 → 2016-09-30 |
| MR | Monitoring | Resolved | 2016-07-01 → 2016-09-30 |
| MR | Monitoring | Resolved | 2016-07-01 → 2016-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 6800 µg/L 68% of the EPA limit 10000 µg/L
worst single sample: 7440 µg/L | 50/54 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2023 |
| Nitrate-Nitrite | 3784 µg/L 38% of the EPA limit 10000 µg/L
worst single sample: 4310 µg/L | 5/5 | SYR4 | 2013–2019 |
| Arsenic | 2.795 µg/L 28% of the EPA limit 10 µg/L
worst single sample: 2.9 µg/L | 4/5 | SYR4 | 2013–2019 |
| TTHM | 6.4315 µg/L 8% of the EPA limit 80 µg/L
worst single sample: 6.97 µg/L | 4/4 | SYR4 | 2012–2016 |
| Dibromochloromethane | 1.372 µg/L No EPA limit set
worst single sample: 1.42 µg/L | 3/14 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.8925 µg/L No EPA limit set
worst single sample: 1.93 µg/L | 2/14 | SYR4 | 2012–2019 |
| Chloroform | 3.502 µg/L No EPA limit set
worst single sample: 3.62 µg/L | 2/14 | SYR4 | 2012–2019 |
| Combined Uranium | 3.1995 µg/L 11% of the EPA limit 30 µg/L
worst single sample: 3.21 µg/L | 2/2 | SYR4 | 2013–2016 |
| Barium | 37 µg/L 1.9% of the EPA limit 2000 µg/L | 1/5 | SYR4 | 2013–2019 |
| Bromoform | 0.5300 µg/L No EPA limit set | 1/14 | SYR4 | 2012–2019 |
| Fluoride | 240 µg/L 6% of the EPA limit 4000 µg/L | 1/5 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 1.44 µg/L 2.4% of the EPA limit 60 µg/L | 1/6 | SYR4 | 2012–2018 |
| Trichloroacetic Acid | 1.44 µg/L No EPA limit set | 1/7 | SYR4 | 2012–2019 |
96 contaminants tested, none detected
Utility contact
Frequently asked questions about Spo Co Water Dist 3 Sys 4
Is Spo Co Water Dist 3 Sys 4 tap water safe to drink?
EPA monitoring detected 14 contaminants in Spo Co Water Dist 3 Sys 4's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Spo Co Water Dist 3 Sys 4's water?
EPA monitoring detected Nitrate, Lead, Nitrate-Nitrite, Arsenic, TTHM, and others. The full list with the level and data source for each is above.
How many people does Spo Co Water Dist 3 Sys 4 serve?
Spo Co Water Dist 3 Sys 4 reports serving 6,233 people in Washington, per its EPA record.
Has Spo Co Water Dist 3 Sys 4 had any water quality violations?
The EPA has 332 violations on file for Spo Co Water Dist 3 Sys 4, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.