Tap WaterIndex

← Washington

Tap water quality report

Sno Pud 1 - Skylite Tracts

EPA monitoring tested this supplier for 34 contaminants and detected 2. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

34
contaminants tested
2
detected
415
people served
7
health-based violations
Washington rankingsLead in WashingtonPFAS in Washington
Water source
Ground water
Ownership
Local government
Counties served
Snohomish

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

7
health-based violations
20
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Archived 2000-12-01 → 2000-12-31
MCL Health-based Archived 2000-01-01 → 2000-01-31
MCL Health-based Archived 2000-01-01 → 2000-01-31
MCL Health-based Archived 2000-01-01 → 2000-01-31
MCL Health-based Archived 1999-08-01 → 1999-08-31
MCL Health-based Archived 1999-08-01 → 1999-08-31
MCL Health-based Archived 1999-08-01 → 1999-08-31
Other Monitoring Resolved 2023-07-01
Other Monitoring Resolved 2021-07-01
MR Monitoring Archived 1996-11-01 → 1996-11-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
970 µg/L 9.7%
of the EPA limit 10000 µg/L
 12/12 SYR4 2013–2018
Lead
0.0019 mg/L 13%
of the EPA limit 0.0150 mg/L
 10/10 LCR 2020
32 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-DichloropropaneBenzeneBromodichloromethaneBromoformChlorobenzeneCarbon TetrachlorideChloroformDichloromethaneDibromoacetic AcidDibromochloromethaneDichloroacetic AcidEthylbenzeneGross Beta Particle ActivityMonobromoacetic AcidMonochloroacetic AcidStyreneTetrachloroethyleneTolueneTotal Haloacetic Acids (HAA5)Trichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
Karen Latimer

Frequently asked questions about Sno Pud 1 - Skylite Tracts

Is Sno Pud 1 - Skylite Tracts tap water safe to drink?

EPA monitoring detected 2 contaminants in Sno Pud 1 - Skylite Tracts's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Sno Pud 1 - Skylite Tracts's water?

EPA monitoring detected Nitrate, Lead. The full list with the level and data source for each is above.

How many people does Sno Pud 1 - Skylite Tracts serve?

Sno Pud 1 - Skylite Tracts reports serving 415 people in Washington, per its EPA record.

Has Sno Pud 1 - Skylite Tracts had any water quality violations?

The EPA has 20 violations on file for Sno Pud 1 - Skylite Tracts, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.