Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1994-08-01 → 1994-08-31 |
| MCL | Health-based | Archived | 1993-09-01 → 1993-09-30 |
| MCL | Health-based | Archived | 1993-09-01 → 1993-09-30 |
| MCL | Health-based | Archived | 1993-08-01 → 1993-08-31 |
| MCL | Health-based | Archived | 1993-08-01 → 1993-08-31 |
| MCL | Health-based | Archived | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Archived | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Archived | 1993-06-01 → 1993-06-30 |
| MCL | Health-based | Archived | 1993-06-01 → 1993-06-30 |
| MCL | Health-based | Archived | 1992-09-01 → 1992-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 5360 µg/L 54% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0046 mg/L 31% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Nitrate-Nitrite | 5360 µg/L 54% of the EPA limit 10000 µg/L | 7/7 | SYR4 | 2013–2019 |
| TTHM | 1.8 µg/L 2.3% of the EPA limit 80 µg/L | 2/2 | SYR4 | 2014–2015 |
| Antimony, Total | 0.3100 µg/L 5.2% of the EPA limit 6 µg/L | 1/1 | SYR4 | 2016 |
| Arsenic | 4.84 µg/L 48% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2016 |
| Barium | 44.31 µg/L 2.2% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2016 |
| Bromodichloromethane | 0.9000 µg/L No EPA limit set | 1/4 | SYR4 | 2013–2017 |
| Copper | 43.33 µg/L 3.3% of the EPA limit 1300 µg/L | 1/1 | SYR4 | 2016 |
| Chloroform | 0.3000 µg/L No EPA limit set | 1/4 | SYR4 | 2013–2017 |
| Chromium | 9.64 µg/L 9.6% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2016 |
| Dibromochloromethane | 0.9000 µg/L No EPA limit set | 1/4 | SYR4 | 2013–2017 |
| Fluoride | 410 µg/L 10% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2016 |
| Lead | 6.13 µg/L 41% of the EPA limit 15 µg/L | 1/1 | SYR4 | 2016 |
| Thallium, Total | 0.1300 µg/L 6.5% of the EPA limit 2 µg/L | 1/1 | SYR4 | 2016 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Skyline Acres Inc
Is Skyline Acres Inc tap water safe to drink?
EPA monitoring detected 15 contaminants in Skyline Acres Inc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Skyline Acres Inc's water?
EPA monitoring detected Nitrate, Lead, Nitrate-Nitrite, TTHM, Antimony, Total, and others. The full list with the level and data source for each is above.
How many people does Skyline Acres Inc serve?
Skyline Acres Inc reports serving 151 people in Washington, per its EPA record.
Has Skyline Acres Inc had any water quality violations?
The EPA has 311 violations on file for Skyline Acres Inc, of which 13 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.