Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Archived | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Archived | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Archived | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Archived | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Archived | 2023-07-01 → 2023-09-30 |
| MCL | Health-based | Archived | 2023-04-01 → 2023-06-30 |
| MCL | Health-based | Archived | 2023-01-01 → 2023-03-31 |
| MCL | Health-based | Archived | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0011 mg/L 7.3% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Bromodichloromethane | 23.465 µg/L No EPA limit set
worst single sample: 23.6 µg/L | 10/10 | SYR4 | 2013–2019 |
| Chloroform | 47.435 µg/L No EPA limit set
worst single sample: 50 µg/L | 10/10 | SYR4 | 2013–2019 |
| Dibromochloromethane | 8.31 µg/L No EPA limit set
worst single sample: 8.4 µg/L | 10/10 | SYR4 | 2013–2019 |
| TTHM | 76.145 µg/L 95% of the EPA limit 80 µg/L
worst single sample: 81.5 µg/L | 10/10 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 12.16 µg/L No EPA limit set
worst single sample: 12.3 µg/L | 8/8 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 28.355 µg/L 47% of the EPA limit 60 µg/L
worst single sample: 29.3 µg/L | 8/8 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 15.635 µg/L No EPA limit set
worst single sample: 16.3 µg/L | 8/8 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.765 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 2/8 | SYR4 | 2013–2019 |
| Nitrate | 110 µg/L 1.1% of the EPA limit 10000 µg/L | 2/6 | SYR4 | 2016–2019 |
| Arsenic | 7.9 µg/L 79% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2018 |
| Bromoform | 0.6000 µg/L No EPA limit set | 1/10 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 1.5 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Saratoga Water District
Is Saratoga Water District tap water safe to drink?
EPA monitoring detected 13 contaminants in Saratoga Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Saratoga Water District's water?
EPA monitoring detected Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Saratoga Water District serve?
Saratoga Water District reports serving 477 people in Washington, per its EPA record.
Has Saratoga Water District had any water quality violations?
The EPA has 22 violations on file for Saratoga Water District, of which 14 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.