Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2021-10-01 → 2021-12-31 |
| MCL | Health-based | Resolved | 2021-07-01 → 2021-09-30 |
| MCL | Health-based | Resolved | 2021-07-01 → 2021-09-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| Other | Monitoring | Resolved | 2025-07-01 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 |
| MR | Monitoring | Resolved | 2019-01-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0025 mg/L 17% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Bromodichloromethane | 9.3 µg/L No EPA limit set
worst single sample: 9.7 µg/L | 9/9 | SYR4 | 2012–2017 |
| Bromoform | 8.76 µg/L No EPA limit set
worst single sample: 9.4 µg/L | 9/9 | SYR4 | 2012–2017 |
| Chloroform | 6.98 µg/L No EPA limit set
worst single sample: 7.5 µg/L | 9/9 | SYR4 | 2012–2017 |
| Dibromochloromethane | 10.76 µg/L No EPA limit set
worst single sample: 11.4 µg/L | 9/9 | SYR4 | 2012–2017 |
| TTHM | 35.8 µg/L 45% of the EPA limit 80 µg/L
worst single sample: 38 µg/L | 9/9 | SYR4 | 2012–2017 |
| Dibromoacetic Acid | 8.19 µg/L No EPA limit set
worst single sample: 9 µg/L | 7/7 | SYR4 | 2012–2017 |
| Dichloroacetic Acid | 6.4 µg/L No EPA limit set
worst single sample: 6.7 µg/L | 7/7 | SYR4 | 2012–2017 |
| Total Haloacetic Acids (HAA5) | 28.37 µg/L 47% of the EPA limit 60 µg/L
worst single sample: 32 µg/L | 7/7 | SYR4 | 2012–2017 |
| Trichloroacetic Acid | 16.575 µg/L No EPA limit set
worst single sample: 19.5 µg/L | 6/7 | SYR4 | 2012–2017 |
| Monochloroacetic Acid | 3.78 µg/L No EPA limit set
worst single sample: 4.1 µg/L | 5/7 | SYR4 | 2012–2017 |
| Monobromoacetic Acid | 5.47 µg/L No EPA limit set
worst single sample: 5.8 µg/L | 3/7 | SYR4 | 2012–2017 |
| Arsenic | 5.4 µg/L 54% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2019 |
42 contaminants tested, none detected
Utility contact
Frequently asked questions about Hide-Away Water Company Inc
Is Hide-Away Water Company Inc tap water safe to drink?
EPA monitoring detected 13 contaminants in Hide-Away Water Company Inc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hide-Away Water Company Inc's water?
EPA monitoring detected Lead, Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Hide-Away Water Company Inc serve?
Hide-Away Water Company Inc reports serving 240 people in Washington, per its EPA record.
Has Hide-Away Water Company Inc had any water quality violations?
The EPA has 18 violations on file for Hide-Away Water Company Inc, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.