Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2010-07-01 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 650 µg/L 6.5% of the EPA limit 10000 µg/L | 14/14 | SYR4 | 2012–2019 |
| Lead | 0.0037 mg/L 25% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Bromodichloromethane | 1.255 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 4/4 | SYR4 | 2012–2017 |
| Bromoform | 2.635 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 4/4 | SYR4 | 2012–2017 |
| Dibromochloromethane | 1.965 µg/L No EPA limit set
worst single sample: 2.1 µg/L | 4/4 | SYR4 | 2012–2017 |
| TTHM | 6.34 µg/L 7.9% of the EPA limit 80 µg/L
worst single sample: 6.7 µg/L | 4/4 | SYR4 | 2012–2017 |
| Chloroform | 0.5000 µg/L No EPA limit set | 3/4 | SYR4 | 2012–2017 |
| Dibromoacetic Acid | 1.75 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 3/3 | SYR4 | 2012–2017 |
| Total Haloacetic Acids (HAA5) | 1.75 µg/L 2.9% of the EPA limit 60 µg/L
worst single sample: 1.8 µg/L | 3/3 | SYR4 | 2012–2017 |
| Gross Beta Particle Activity | 3.2695 pCi/L No EPA limit set
worst single sample: 3.28 pCi/L | 2/2 | SYR4 | 2014 |
| Arsenic | 5 µg/L 50% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2019 |
| Barium | 61 µg/L 3.1% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2019 |
| Chromium | 1 µg/L 1% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2019 |
| Fluoride | 120 µg/L 3% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2019 |
| Nitrate-Nitrite | 650 µg/L 6.5% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2019 |
| Selenium | 2 µg/L 4% of the EPA limit 50 µg/L | 1/1 | SYR4 | 2019 |
40 contaminants tested, none detected
Utility contact
Frequently asked questions about Parkwood Manor Mhp
Is Parkwood Manor Mhp tap water safe to drink?
EPA monitoring detected 16 contaminants in Parkwood Manor Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Parkwood Manor Mhp's water?
EPA monitoring detected Nitrate, Lead, Bromodichloromethane, Bromoform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Parkwood Manor Mhp serve?
Parkwood Manor Mhp reports serving 301 people in Washington, per its EPA record.
Has Parkwood Manor Mhp had any water quality violations?
The EPA has 37 violations on file for Parkwood Manor Mhp, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.