Tap WaterIndex

← Washington

Tap water quality report

Nisqually Park

EPA monitoring tested this supplier for 66 contaminants and detected 2. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

66
contaminants tested
2
detected
218
people served
0
health-based violations
Washington rankingsLead in WashingtonPFAS in Washington
Water source
Ground water
Ownership
Private
Counties served
Pierce

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
14
violations on file
0
still open
ViolationTypeStatusPeriod
Other Monitoring Resolved 2016-07-01
Other Monitoring Resolved 2015-07-01
Other Monitoring Resolved 2014-07-01
MR Monitoring Resolved 2014-01-01
Other Monitoring Resolved 2013-07-01
Other Monitoring Resolved 2011-07-01
MR Monitoring Archived 2005-02-01 → 2005-02-28
Other Monitoring Resolved 1999-10-19 → 1999-12-31
MR Monitoring Resolved 1997-07-01 → 1999-07-01
MR Monitoring Archived 1993-10-01 → 1993-10-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Lead
0.0010 mg/L 6.7%
of the EPA limit 0.0150 mg/L
 10/10 LCR 2023
Lead
1 µg/L 6.7%
of the EPA limit 15 µg/L
 1/4 SYR4 2013–2019
64 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromodichloromethaneBromoformChlorobenzeneCopperCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChloroformChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromochloromethaneDinosebEndrinEthylbenzeneFluorideHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitrateNitrate-NitriteNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
James Jensen

Frequently asked questions about Nisqually Park

Is Nisqually Park tap water safe to drink?

EPA monitoring detected 2 contaminants in Nisqually Park's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Nisqually Park's water?

EPA monitoring detected Lead, Lead. The full list with the level and data source for each is above.

How many people does Nisqually Park serve?

Nisqually Park reports serving 218 people in Washington, per its EPA record.

Has Nisqually Park had any water quality violations?

The EPA has 14 violations on file for Nisqually Park, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.