Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2003-09-01 → 2003-09-30 |
| MCL | Health-based | Archived | 1999-02-01 → 1999-02-28 |
| MCL | Health-based | Archived | 1999-02-01 → 1999-02-28 |
| MCL | Health-based | Archived | 1999-02-01 → 1999-02-28 |
| MR | Monitoring | Resolved | 2022-10-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-10-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-10-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-10-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-10-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-10-01 → 2022-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 4.8 µg/L No EPA limit set | 15/22 | SYR4 | 2012–2019 |
| Chloroform | 4.7 µg/L No EPA limit set | 15/22 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.3 µg/L No EPA limit set | 15/22 | SYR4 | 2012–2019 |
| TTHM | 16.2 µg/L 20% of the EPA limit 80 µg/L | 15/15 | SYR4 | 2014–2019 |
| Nitrate | 110 µg/L 1.1% of the EPA limit 10000 µg/L | 14/50 | SYR4 | 2012–2019 |
| Bromoform | 3.44 µg/L No EPA limit set | 11/22 | SYR4 | 2012–2019 |
| Lead | 0.0022 mg/L 15% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Nitrate-Nitrite | 110 µg/L 1.1% of the EPA limit 10000 µg/L | 7/25 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 2.4 µg/L 4% of the EPA limit 60 µg/L | 6/10 | SYR4 | 2014–2018 |
| Trichloroacetic Acid | 2.4 µg/L No EPA limit set | 6/12 | SYR4 | 2014–2019 |
| Lithium | 22.1 µg/L No EPA limit set | 6/6 | UCMR-5 | 2024 |
| Barium | 3.37 µg/L 0.2% of the EPA limit 2000 µg/L | 4/4 | SYR4 | 2015–2016 |
| Copper | 1.24 µg/L 0.1% of the EPA limit 1300 µg/L | 4/4 | SYR4 | 2015–2016 |
| Fluoride | 1610 µg/L 40% of the EPA limit 4000 µg/L | 4/4 | SYR4 | 2015–2016 |
| Thallium, Total | 0.3600 µg/L 18% of the EPA limit 2 µg/L | 4/4 | SYR4 | 2015–2016 |
| Arsenic | 3.29 µg/L 33% of the EPA limit 10 µg/L | 3/4 | SYR4 | 2015–2016 |
| Chromium | 0.1900 µg/L 0.2% of the EPA limit 100 µg/L | 2/4 | SYR4 | 2015–2016 |
| Lead | 0.6600 µg/L 4.4% of the EPA limit 15 µg/L | 2/4 | SYR4 | 2015–2016 |
86 contaminants tested, none detected
Utility contact
Frequently asked questions about Moxee Water Department
Is Moxee Water Department tap water safe to drink?
EPA monitoring detected 18 contaminants in Moxee Water Department's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Moxee Water Department's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Nitrate, and others. The full list with the level and data source for each is above.
How many people does Moxee Water Department serve?
Moxee Water Department reports serving 5,599 people in Washington, per its EPA record.
Has Moxee Water Department had any water quality violations?
The EPA has 89 violations on file for Moxee Water Department, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.