Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2000-10-01 → 2000-10-31 |
| MCL | Health-based | Archived | 2000-10-01 → 2000-10-31 |
| MCL | Health-based | Archived | 2000-10-01 → 2000-10-31 |
| MCL | Health-based | Archived | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Archived | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Archived | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Archived | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Archived | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Archived | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Archived | 1992-06-01 → 1992-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Bromodichloromethane | 24 µg/L No EPA limit set | 6/6 | SYR4 | 2012–2019 |
| Chloroform | 13.6 µg/L No EPA limit set | 6/6 | SYR4 | 2012–2019 |
| TTHM | 70.6 µg/L 88% of the EPA limit 80 µg/L | 6/6 | SYR4 | 2012–2019 |
| Bromoform | 8.4 µg/L No EPA limit set | 5/6 | SYR4 | 2012–2019 |
| Dibromochloromethane | 28.5 µg/L No EPA limit set | 5/6 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 6.4 µg/L No EPA limit set | 5/5 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 19.2 µg/L 32% of the EPA limit 60 µg/L | 5/5 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 7.5 µg/L No EPA limit set | 4/5 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 5.3 µg/L No EPA limit set | 3/5 | SYR4 | 2012–2019 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2013 |
| Barium | 41 µg/L 2.1% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2013 |
| Chromium | 2 µg/L 2% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2013 |
| Fluoride | 310 µg/L 7.8% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2013 |
| Gross Beta Particle Activity | 1.74 pCi/L No EPA limit set | 1/1 | SYR4 | 2017 |
59 contaminants tested, none detected
Utility contact
Frequently asked questions about Mountain View Water Association
Is Mountain View Water Association tap water safe to drink?
EPA monitoring detected 15 contaminants in Mountain View Water Association's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mountain View Water Association's water?
EPA monitoring detected Lead, Bromodichloromethane, Chloroform, TTHM, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Mountain View Water Association serve?
Mountain View Water Association reports serving 186 people in Washington, per its EPA record.
Has Mountain View Water Association had any water quality violations?
The EPA has 76 violations on file for Mountain View Water Association, of which 13 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.