Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2023-09-01 → 2023-09-30 |
| MR | Monitoring | Archived | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Archived | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Archived | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Archived | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Archived | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2007-10-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2007-10-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2007-10-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2007-10-01 → 2007-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 693.05 µg/L 6.9% of the EPA limit 10000 µg/L
worst single sample: 699 µg/L | 28/28 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 21/21 | LCR | 2025 |
| Chloroform | 1.642 µg/L No EPA limit set
worst single sample: 1.72 µg/L | 5/11 | SYR4 | 2012–2019 |
| TTHM | 3.912 µg/L 4.9% of the EPA limit 80 µg/L
worst single sample: 4.27 µg/L | 5/5 | SYR4 | 2014–2019 |
| Barium | 203.3 µg/L 10% of the EPA limit 2000 µg/L
worst single sample: 205 µg/L | 3/3 | SYR4 | 2012–2016 |
| Bromodichloromethane | 1.534 µg/L No EPA limit set
worst single sample: 1.62 µg/L | 3/11 | SYR4 | 2012–2019 |
| Copper | 7.592 µg/L 0.6% of the EPA limit 1300 µg/L
worst single sample: 7.7 µg/L | 3/3 | SYR4 | 2012–2016 |
| Nitrate-Nitrite | 656.8 µg/L 6.6% of the EPA limit 10000 µg/L
worst single sample: 670 µg/L | 3/3 | SYR4 | 2012–2016 |
| Dibromochloromethane | 1.36 µg/L No EPA limit set | 1/11 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 1.24 µg/L No EPA limit set | 1/7 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 1.24 µg/L 2.1% of the EPA limit 60 µg/L | 1/6 | SYR4 | 2014–2018 |
46 contaminants tested, none detected
Utility contact
Frequently asked questions about Stevens Co Pud - Loon Lake
Is Stevens Co Pud - Loon Lake tap water safe to drink?
EPA monitoring detected 11 contaminants in Stevens Co Pud - Loon Lake's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Stevens Co Pud - Loon Lake's water?
EPA monitoring detected Nitrate, Lead, Chloroform, TTHM, Barium, and others. The full list with the level and data source for each is above.
How many people does Stevens Co Pud - Loon Lake serve?
Stevens Co Pud - Loon Lake reports serving 2,487 people in Washington, per its EPA record.
Has Stevens Co Pud - Loon Lake had any water quality violations?
The EPA has 428 violations on file for Stevens Co Pud - Loon Lake, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.