Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1994-09-01 → 1994-09-30 |
| MCL | Health-based | Archived | 1994-09-01 → 1994-09-30 |
| MCL | Health-based | Archived | 1994-08-01 → 1994-08-31 |
| MCL | Health-based | Archived | 1994-08-01 → 1994-08-31 |
| MR | Monitoring | Resolved | 2021-01-01 → 2021-12-31 |
| MR | Monitoring | Resolved | 2012-09-01 → 2012-09-30 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.00050 mg/L 3.3% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2023 |
| Bromodichloromethane | 6.0045 µg/L No EPA limit set
worst single sample: 6.42 µg/L | 4/5 | SYR4 | 2012–2018 |
| Bromoform | 1.5175 µg/L No EPA limit set
worst single sample: 1.57 µg/L | 4/5 | SYR4 | 2012–2018 |
| Chloroform | 4.177 µg/L No EPA limit set
worst single sample: 4.36 µg/L | 4/5 | SYR4 | 2012–2018 |
| Dibromochloromethane | 6.5945 µg/L No EPA limit set
worst single sample: 7.19 µg/L | 4/5 | SYR4 | 2012–2018 |
| TTHM | 18.1 µg/L 23% of the EPA limit 80 µg/L
worst single sample: 19.54 µg/L | 4/4 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 1.5925 µg/L No EPA limit set
worst single sample: 1.61 µg/L | 2/3 | SYR4 | 2012–2017 |
| Dichloroacetic Acid | 2.193 µg/L No EPA limit set
worst single sample: 2.23 µg/L | 2/3 | SYR4 | 2012–2017 |
| Total Haloacetic Acids (HAA5) | 3.7855 µg/L 6.3% of the EPA limit 60 µg/L
worst single sample: 3.84 µg/L | 2/3 | SYR4 | 2012–2017 |
| Barium | 76 µg/L 3.8% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2012 |
| Copper | 11.3 µg/L 0.9% of the EPA limit 1300 µg/L | 1/1 | SYR4 | 2012 |
| Fluoride | 197 µg/L 4.9% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2012 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Lakehurst h2o
Is Lakehurst h2o tap water safe to drink?
EPA monitoring detected 12 contaminants in Lakehurst h2o's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lakehurst h2o's water?
EPA monitoring detected Lead, Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Lakehurst h2o serve?
Lakehurst h2o reports serving 170 people in Washington, per its EPA record.
Has Lakehurst h2o had any water quality violations?
The EPA has 66 violations on file for Lakehurst h2o, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.