Tap WaterIndex

← Washington

Tap water quality report

Glen Cove Water Association

EPA monitoring tested this supplier for 11 contaminants and detected 10. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

11
contaminants tested
10
detected
39
people served
0
health-based violations
Washington rankingsLead in WashingtonPFAS in Washington
Water source
SWP
Ownership
Private
Counties served
Whatcom

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
6
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2018-01-01 → 2018-12-31
MR Monitoring Resolved 2018-01-01 → 2018-12-31
MR Monitoring Resolved 2016-01-01 → 2016-12-31
MR Monitoring Resolved 2016-01-01 → 2016-12-31
Other Monitoring Resolved 2013-07-01
MR Monitoring Archived 1996-09-01 → 1996-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
5.4 µg/L
No EPA limit set
 6/6 SYR4 2012–2019
Chloroform
36.8 µg/L
No EPA limit set
 6/6 SYR4 2012–2019
Dichloroacetic Acid
19.2 µg/L
No EPA limit set
 6/6 SYR4 2012–2019
TTHM
41.4 µg/L 52%
of the EPA limit 80 µg/L
 6/6 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
66.7 µg/L 111%
of the EPA limit, in the worst sample — 60 µg/L
 6/6 SYR4 2012–2019
Trichloroacetic Acid
14.3 µg/L
No EPA limit set
 6/6 SYR4 2012–2019
Dibromoacetic Acid
6.6 µg/L
No EPA limit set
 2/6 SYR4 2012–2019
Monochloroacetic Acid
16.1 µg/L
No EPA limit set
 2/6 SYR4 2012–2019
Dibromochloromethane
0.6000 µg/L
No EPA limit set
 1/6 SYR4 2012–2019
Monobromoacetic Acid
11.7 µg/L
No EPA limit set
 1/6 SYR4 2012–2019
1 contaminants tested, none detected
Bromoform

Utility contact

Contact
Bryan Plog

Frequently asked questions about Glen Cove Water Association

Is Glen Cove Water Association tap water safe to drink?

EPA monitoring detected 10 contaminants in Glen Cove Water Association's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Glen Cove Water Association's water?

EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Glen Cove Water Association serve?

Glen Cove Water Association reports serving 39 people in Washington, per its EPA record.

Has Glen Cove Water Association had any water quality violations?

The EPA has 6 violations on file for Glen Cove Water Association, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.