Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Archived | 2004-08-01 → 2004-08-31 |
| MCL | Health-based | Archived | 1998-05-01 → 1998-05-31 |
| MCL | Health-based | Archived | 1998-05-01 → 1998-05-31 |
| MCL | Health-based | Archived | 1998-05-01 → 1998-05-31 |
| MCL | Health-based | Archived | 1998-05-01 → 1998-05-31 |
| MCL | Health-based | Archived | 1994-08-01 → 1994-08-31 |
| MCL | Health-based | Archived | 1994-07-01 → 1994-07-31 |
| MCL | Health-based | Archived | 1992-11-01 → 1992-11-30 |
| MCL | Health-based | Archived | 1992-11-01 → 1992-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 5700 µg/L 57% of the EPA limit 10000 µg/L | 12/12 | SYR4 | 2012–2019 |
| Lead | 0.0016 mg/L 11% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2023 |
| TTHM | 25.8 µg/L 32% of the EPA limit 80 µg/L | 5/5 | SYR4 | 2013–2018 |
| Bromodichloromethane | 2.32 µg/L No EPA limit set | 4/5 | SYR4 | 2013–2018 |
| Bromoform | 12.7 µg/L No EPA limit set | 4/5 | SYR4 | 2013–2018 |
| Chloroform | 1.11 µg/L No EPA limit set | 4/5 | SYR4 | 2013–2018 |
| Dibromochloromethane | 10.3 µg/L No EPA limit set | 4/5 | SYR4 | 2013–2018 |
| Dibromoacetic Acid | 10 µg/L No EPA limit set | 3/4 | SYR4 | 2013–2018 |
| Total Haloacetic Acids (HAA5) | 11.5 µg/L 19% of the EPA limit 60 µg/L | 3/4 | SYR4 | 2013–2018 |
| Combined Uranium | 13 µg/L 43% of the EPA limit 30 µg/L | 2/2 | SYR4 | 2012 |
| Dichloroacetic Acid | 1.5 µg/L No EPA limit set | 2/4 | SYR4 | 2013–2018 |
| Arsenic | 10.5 µg/L 105% of the EPA limit, in the worst sample — 10 µg/L | 1/1 | SYR4 | 2016 |
| Barium | 99.7 µg/L 5% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2016 |
| Copper | 23.2 µg/L 1.8% of the EPA limit 1300 µg/L | 1/1 | SYR4 | 2016 |
| Fluoride | 353 µg/L 8.8% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2016 |
| Nitrate-Nitrite | 5090 µg/L 51% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2016 |
| Selenium | 2.14 µg/L 4.3% of the EPA limit 50 µg/L | 1/1 | SYR4 | 2016 |
57 contaminants tested, none detected
Utility contact
Frequently asked questions about Homestead Manufactured Housing
Is Homestead Manufactured Housing tap water safe to drink?
EPA monitoring detected 17 contaminants in Homestead Manufactured Housing's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Homestead Manufactured Housing's water?
EPA monitoring detected Nitrate, Lead, TTHM, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Homestead Manufactured Housing serve?
Homestead Manufactured Housing reports serving 300 people in Washington, per its EPA record.
Has Homestead Manufactured Housing had any water quality violations?
The EPA has 130 violations on file for Homestead Manufactured Housing, of which 10 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.