Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1994-07-01 → 1994-07-31 |
| MCL | Health-based | Archived | 1993-10-01 → 1993-10-31 |
| MCL | Health-based | Archived | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Archived | 1992-11-01 → 1992-11-30 |
| Other | Monitoring | Resolved | 2024-07-01 |
| MR | Monitoring | Archived | 1979-10-01 → 1979-10-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 2.806 µg/L No EPA limit set
worst single sample: 2.91 µg/L | 14/19 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.453 µg/L No EPA limit set
worst single sample: 2.57 µg/L | 14/19 | SYR4 | 2012–2019 |
| Lead | 0.0011 mg/L 7.3% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| TTHM | 7.52 µg/L 9.4% of the EPA limit 80 µg/L
worst single sample: 7.91 µg/L | 14/14 | SYR4 | 2013–2019 |
| Chloroform | 2.6045 µg/L No EPA limit set
worst single sample: 2.61 µg/L | 12/19 | SYR4 | 2012–2019 |
| Nitrate | 810 µg/L 8.1% of the EPA limit 10000 µg/L | 10/40 | SYR4 | 2012–2019 |
| Bromoform | 1.215 µg/L No EPA limit set
worst single sample: 1.27 µg/L | 3/19 | SYR4 | 2012–2019 |
| Barium | 119.5 µg/L 6% of the EPA limit 2000 µg/L
worst single sample: 120 µg/L | 2/3 | SYR4 | 2012–2017 |
| Dichloroacetic Acid | 1.4485 µg/L No EPA limit set
worst single sample: 1.45 µg/L | 2/14 | SYR4 | 2013–2019 |
| Fluoride | 287.5 µg/L 7.2% of the EPA limit 4000 µg/L
worst single sample: 290 µg/L | 2/3 | SYR4 | 2012–2017 |
| Total Haloacetic Acids (HAA5) | 1.4485 µg/L 2.4% of the EPA limit 60 µg/L
worst single sample: 1.45 µg/L | 2/12 | SYR4 | 2013–2018 |
| Nitrate-Nitrite | 790 µg/L 7.9% of the EPA limit 10000 µg/L | 1/3 | SYR4 | 2012–2017 |
76 contaminants tested, none detected
Utility contact
Frequently asked questions about Colville Water Department
Is Colville Water Department tap water safe to drink?
EPA monitoring detected 12 contaminants in Colville Water Department's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Colville Water Department's water?
EPA monitoring detected Bromodichloromethane, Dibromochloromethane, Lead, TTHM, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Colville Water Department serve?
Colville Water Department reports serving 4,945 people in Washington, per its EPA record.
Has Colville Water Department had any water quality violations?
The EPA has 6 violations on file for Colville Water Department, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.