← Washington

Tap water quality report

Indian Village Estates Water Assn

EPA monitoring tested this supplier for 73 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

73
contaminants tested
18
detected
90
people served
2
health-based violations
Water source
Ground water
Ownership
Private
Counties served
Spokane

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

2
health-based violations
160
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 1996-05-01 → 1996-05-31
MCL Health-based Archived 1994-01-01 → 1994-01-31
MON Monitoring Resolved 2024-10-01 → 2024-10-31
MON Monitoring Resolved 2023-01-01 → 2023-01-31
MR Monitoring Resolved 2012-10-02 → 2013-10-01
MR Monitoring Resolved 2012-10-02 → 2013-10-01
MR Monitoring Resolved 2012-10-02 → 2013-10-01
MR Monitoring Resolved 2012-10-02 → 2013-10-01
MR Monitoring Resolved 2012-10-02 → 2013-10-01
MR Monitoring Resolved 2012-10-02 → 2013-10-01

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
7856.5 µg/L 79%
of the EPA limit 10000 µg/L
worst single sample: 8500 µg/L
32/32 SYR4 2012–2019
Lead
0.0018 mg/L 12%
of the EPA limit 0.0150 mg/L
15/15 LCR 2025
Bromodichloromethane
6.582 µg/L
No EPA limit set
worst single sample: 6.71 µg/L
5/9 SYR4 2012–2019
TTHM
16.742 µg/L 21%
of the EPA limit 80 µg/L
worst single sample: 16.83 µg/L
5/5 SYR4 2013–2018
Chloroform
7.663 µg/L
No EPA limit set
worst single sample: 7.87 µg/L
4/9 SYR4 2012–2019
Dibromochloromethane
3.453 µg/L
No EPA limit set
worst single sample: 3.63 µg/L
4/9 SYR4 2012–2019
Dichloroacetic Acid
3.752 µg/L
No EPA limit set
worst single sample: 3.83 µg/L
3/5 SYR4 2012–2018
Total Haloacetic Acids (HAA5)
6.304 µg/L 11%
of the EPA limit 60 µg/L
worst single sample: 6.43 µg/L
3/5 SYR4 2012–2018
Trichloroacetic Acid
2.096 µg/L
No EPA limit set
worst single sample: 2.12 µg/L
3/5 SYR4 2012–2018
Barium
39.925 µg/L 2%
of the EPA limit 2000 µg/L
worst single sample: 41.5 µg/L
2/2 SYR4 2015–2016
Copper
389.65 µg/L 30%
of the EPA limit 1300 µg/L
worst single sample: 396 µg/L
2/2 SYR4 2015–2016
Fluoride
196.45 µg/L 4.9%
of the EPA limit 4000 µg/L
worst single sample: 199 µg/L
2/2 SYR4 2015–2016
Nitrate-Nitrite
7099.5 µg/L 71%
of the EPA limit 10000 µg/L
worst single sample: 7330 µg/L
2/2 SYR4 2015–2016
Arsenic
5.2 µg/L 52%
of the EPA limit 10 µg/L
1/2 SYR4 2015–2016
Bromoform
2.27 µg/L
No EPA limit set
1/9 SYR4 2012–2019
Chromium
1.5 µg/L 1.5%
of the EPA limit 100 µg/L
1/2 SYR4 2015–2016
Di(2-ethylhexyl) Phthalate
0.7200 µg/L 12%
of the EPA limit 6 µg/L
1/2 SYR4 2018
Dibromoacetic Acid
1.1 µg/L
No EPA limit set
1/5 SYR4 2012–2018
55 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoLeadMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitritePentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
Joel Lee

Frequently asked questions about Indian Village Estates Water Assn

Is Indian Village Estates Water Assn tap water safe to drink?

EPA monitoring detected 18 contaminants in Indian Village Estates Water Assn's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Indian Village Estates Water Assn's water?

EPA monitoring detected Nitrate, Lead, Bromodichloromethane, TTHM, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Indian Village Estates Water Assn serve?

Indian Village Estates Water Assn reports serving 90 people in Washington, per its EPA record.

Has Indian Village Estates Water Assn had any water quality violations?

The EPA has 160 violations on file for Indian Village Estates Water Assn, of which 2 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.