Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Archived | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2017-01-01 → 2017-03-31 |
| MCL | Health-based | Resolved | 2017-01-01 → 2017-03-31 |
| MCL | Health-based | Resolved | 2017-01-01 → 2017-03-31 |
| MCL | Health-based | Resolved | 2016-10-01 → 2016-12-31 |
| MCL | Health-based | Resolved | 2016-10-01 → 2016-12-31 |
| MCL | Health-based | Resolved | 2016-10-01 → 2016-12-31 |
| MCL | Health-based | Resolved | 2016-07-01 → 2016-09-30 |
| MCL | Health-based | Resolved | 2016-07-01 → 2016-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 76.8 µg/L No EPA limit set | 62/65 | SYR4 | 2012–2019 |
| Bromodichloromethane | 33.8 µg/L No EPA limit set | 51/51 | SYR4 | 2012–2019 |
| TTHM | 121.6 µg/L 152% of the EPA limit, in the worst sample — 80 µg/L | 51/51 | SYR4 | 2012–2019 |
| Dibromochloromethane | 11 µg/L No EPA limit set | 47/51 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 18.886 µg/L No EPA limit set | 41/41 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 45.4 µg/L 76% of the EPA limit 60 µg/L | 41/41 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 27.5 µg/L No EPA limit set | 41/41 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 6.6 µg/L No EPA limit set | 23/42 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2023 |
| Monochloroacetic Acid | 3.9 µg/L No EPA limit set | 8/42 | SYR4 | 2012–2019 |
| Xylenes, Total | 1.23 µg/L 0% of the EPA limit 10000 µg/L | 8/17 | SYR4 | 2015–2018 |
| Bromoform | 0.6500 µg/L No EPA limit set | 4/52 | SYR4 | 2012–2019 |
| Nitrate | 300 µg/L 3% of the EPA limit 10000 µg/L | 4/18 | SYR4 | 2012–2017 |
| Monobromoacetic Acid | 2 µg/L No EPA limit set | 2/42 | SYR4 | 2012–2019 |
| Arsenic | 4.8 µg/L 48% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2012 |
| Barium | 438 µg/L 22% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2012 |
| Lead | 1.2 µg/L 8% of the EPA limit 15 µg/L | 1/1 | SYR4 | 2012 |
38 contaminants tested, none detected
Utility contact
Frequently asked questions about Boston Harbor
Is Boston Harbor tap water safe to drink?
EPA monitoring detected 17 contaminants in Boston Harbor's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Boston Harbor's water?
EPA monitoring detected Chloroform, Bromodichloromethane, TTHM, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Boston Harbor serve?
Boston Harbor reports serving 1,153 people in Washington, per its EPA record.
Has Boston Harbor had any water quality violations?
The EPA has 60 violations on file for Boston Harbor, of which 11 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.