Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2013-10-01 → 2013-12-31 |
| MR | Monitoring | Resolved | 2013-10-01 → 2013-12-31 |
| MR | Monitoring | Resolved | 2011-10-01 → 2011-12-31 |
| MR | Monitoring | Resolved | 2011-10-01 → 2011-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2023 |
| Nitrate | 820 µg/L 8.2% of the EPA limit 10000 µg/L | 10/34 | SYR4 | 2012–2019 |
| Bromoform | 3.12 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 7/11 | SYR4 | 2012–2018 |
| Dibromochloromethane | 3.3 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 7/11 | SYR4 | 2012–2018 |
| TTHM | 8.87 µg/L 11% of the EPA limit 80 µg/L
worst single sample: 9.8 µg/L | 7/7 | SYR4 | 2012–2018 |
| Bromodichloromethane | 1.8 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 6/11 | SYR4 | 2012–2018 |
| Arsenic | 9.83 µg/L 98% of the EPA limit 10 µg/L
worst single sample: 9.9 µg/L | 3/3 | SYR4 | 2019 |
| Chloroform | 0.6900 µg/L No EPA limit set
worst single sample: 0.7000 µg/L | 3/11 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 1.19 µg/L 2% of the EPA limit 60 µg/L
worst single sample: 1.2 µg/L | 2/5 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 1/5 | SYR4 | 2012–2018 |
| Selenium | 3.4 µg/L 6.8% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2019 |
| Trichloroacetic Acid | 1.2 µg/L No EPA limit set | 1/5 | SYR4 | 2012–2018 |
45 contaminants tested, none detected
Utility contact
Frequently asked questions about Camano Hills Water Company Inc
Is Camano Hills Water Company Inc tap water safe to drink?
EPA monitoring detected 12 contaminants in Camano Hills Water Company Inc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Camano Hills Water Company Inc's water?
EPA monitoring detected Lead, Nitrate, Bromoform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Camano Hills Water Company Inc serve?
Camano Hills Water Company Inc reports serving 286 people in Washington, per its EPA record.
Has Camano Hills Water Company Inc had any water quality violations?
The EPA has 71 violations on file for Camano Hills Water Company Inc, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.