← Virginia

Tap water quality report

Marshall Waterworks

EPA monitoring tested this supplier for 49 contaminants and detected 24. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

49
contaminants tested
24
detected
2,363
people served
11
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Fauquier

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

11
health-based violations
103
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2013-04-01 → 2013-06-30
MCL Health-based Resolved 2013-04-01 → 2013-06-30
MCL Health-based Resolved 2013-04-01 → 2013-06-30
MCL Health-based Resolved 2013-04-01 → 2013-06-30
MCL Health-based Resolved 2009-10-01 → 2009-12-31
MCL Health-based Resolved 2009-10-01 → 2009-12-31
MCL Health-based Resolved 2009-10-01 → 2009-12-31
MCL Health-based Resolved 2009-10-01 → 2009-12-31
MCL Health-based Archived 1993-10-01 → 1993-10-31
MCL Health-based Archived 1993-10-01 → 1993-10-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
1080 µg/L 83%
of the EPA limit 1300 µg/L
69/80 SYR4 2012–2018
Dibromochloromethane
6.9 µg/L
No EPA limit set
41/51 SYR4 2012–2019
Bromodichloromethane
7.9 µg/L
No EPA limit set
39/51 SYR4 2012–2019
Bromoform
9.2 µg/L
No EPA limit set
31/51 SYR4 2012–2019
Chloroform
8.8 µg/L
No EPA limit set
30/51 SYR4 2012–2019
Trichloroethylene
6 µg/L 120%
of the EPA limit, in the worst sample — 5 µg/L
29/53 SYR4 2012–2019
Gross Beta Particle Activity
22.6 pCi/L
No EPA limit set
22/22 SYR4 2012–2019
Nitrate-Nitrite
1560 µg/L 16%
of the EPA limit 10000 µg/L
22/62 SYR4 2012–2019
Combined Radium (-226 And -228)
8.5 pCi/L 170%
of the EPA limit, in the worst sample — 5 pCi/L
18/18 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
16/16 LCR 2024
Barium
108 µg/L 5.4%
of the EPA limit 2000 µg/L
10/10 SYR4 2014–2018
TTHM
26 µg/L 33%
of the EPA limit 80 µg/L
9/9 SYR4 2013–2019
Lead
68 µg/L 453%
of the EPA limit, in the worst sample — 15 µg/L
8/80 SYR4 2012–2018
cis-1,2-Dichloroethylene
0.7000 µg/L 1%
of the EPA limit 70 µg/L
6/53 SYR4 2012–2019
Fluoride
290 µg/L 7.2%
of the EPA limit 4000 µg/L
5/10 SYR4 2014–2018
Tetrachloroethylene
2.3 µg/L 46%
of the EPA limit 5 µg/L
5/53 SYR4 2012–2019
trans-1,2-Dichloroethylene
0.8000 µg/L 0.8%
of the EPA limit 100 µg/L
5/53 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
2.2 µg/L 3.7%
of the EPA limit 60 µg/L
4/9 SYR4 2013–2019
Xylenes, Total
3.2 µg/L 0%
of the EPA limit 10000 µg/L
4/53 SYR4 2012–2019
Dibromoacetic Acid
1 µg/L
No EPA limit set
2/9 SYR4 2013–2019
Ethylbenzene
0.9000 µg/L 0.1%
of the EPA limit 700 µg/L
2/53 SYR4 2012–2019
Trichloroacetic Acid
1.7 µg/L
No EPA limit set
2/9 SYR4 2013–2019
Dichloroacetic Acid
1.2 µg/L
No EPA limit set
1/9 SYR4 2013–2019
Vinyl Chloride
1.1 µg/L 55%
of the EPA limit 2 µg/L
1/53 SYR4 2012–2019
25 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-DichloropropaneAntimony, TotalArsenicBenzeneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbon TetrachlorideChromiumDichloromethaneMercuryMonobromoacetic AcidMonochloroacetic AcidSeleniumStyreneThallium, TotalTolueneO-DichlorobenzeneP-Dichlorobenzene

Utility contact

Contact
SMITH, MILAS
Phone
540-349-2092
Email
msmith@fcwsa.org

Frequently asked questions about Marshall Waterworks

Is Marshall Waterworks tap water safe to drink?

EPA monitoring detected 24 contaminants in Marshall Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Marshall Waterworks's water?

EPA monitoring detected Copper, Dibromochloromethane, Bromodichloromethane, Bromoform, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Marshall Waterworks serve?

Marshall Waterworks reports serving 2,363 people in Virginia, per its EPA record.

Has Marshall Waterworks had any water quality violations?

The EPA has 103 violations on file for Marshall Waterworks, of which 11 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.