Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2025-07-01 |
| Other | Monitoring | Resolved | 2025-07-01 |
| Other | Monitoring | Resolved | 2024-10-02 |
| Other | Monitoring | Resolved | 2024-10-02 |
| Other | Monitoring | Resolved | 2024-07-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| MON | Monitoring | Resolved | 2020-06-01 → 2020-06-30 |
| MON | Monitoring | Resolved | 2020-06-01 → 2020-06-30 |
| MON | Monitoring | Resolved | 2020-06-01 → 2020-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 68.825 µg/L 86% of the EPA limit 80 µg/L
worst single sample: 72.8 µg/L | 56/56 | SYR4 | 2012–2019 |
| Bromodichloromethane | 10.06 µg/L No EPA limit set
worst single sample: 12 µg/L | 49/49 | SYR4 | 2012–2019 |
| Chloroform | 63.86 µg/L No EPA limit set
worst single sample: 68.9 µg/L | 49/49 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 11.6 µg/L 19% of the EPA limit 60 µg/L
worst single sample: 42 µg/L | 41/56 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 9.36 µg/L No EPA limit set
worst single sample: 15.1 µg/L | 37/49 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.78 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 33/49 | SYR4 | 2012–2019 |
| Lead | 0.0018 mg/L 12% of the EPA limit 0.0150 mg/L | 21/21 | LCR | 2025 |
| Dichloroacetic Acid | 3.625 µg/L No EPA limit set
worst single sample: 23.1 µg/L | 20/49 | SYR4 | 2012–2019 |
| Copper | 614.51 µg/L 47% of the EPA limit 1300 µg/L
worst single sample: 678 µg/L | 15/15 | SYR4 | 2013–2019 |
| Lead | 3.13 µg/L 21% of the EPA limit 15 µg/L
worst single sample: 3.4 µg/L | 10/15 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 3.8 µg/L No EPA limit set | 1/49 | SYR4 | 2012–2019 |
3 contaminants tested, none detected
Utility contact
Frequently asked questions about Clawson Water
Is Clawson Water tap water safe to drink?
EPA monitoring detected 11 contaminants in Clawson Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Clawson Water's water?
EPA monitoring detected TTHM, Bromodichloromethane, Chloroform, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Clawson Water serve?
Clawson Water reports serving 200 people in Utah, per its EPA record.
Has Clawson Water had any water quality violations?
The EPA has 42 violations on file for Clawson Water, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.