Tap WaterIndex

← Texas

Tap water quality report

City of Yantis

EPA monitoring tested this supplier for 78 contaminants and detected 20. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

78
contaminants tested
20
detected
488
people served
7
health-based violations
Texas rankingsLead in TexasPFAS in Texas
Water source
Ground water
Ownership
Local government
Counties served
Wood

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

7
health-based violations
84
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
MCL Health-based Archived 2020-01-01 → 2020-03-31
MCL Health-based Archived 2020-01-01 → 2020-03-31
MCL Health-based Archived 2020-01-01 → 2020-03-31
MR Monitoring Resolved 2025-12-30
MR Monitoring Resolved 2025-12-30
Other Monitoring Resolved 2025-07-01

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
830 µg/L 64%
of the EPA limit 1300 µg/L
worst single sample: 1000 µg/L
31/32 SYR4 2013–2019
Chloroform
5.622 µg/L
No EPA limit set
worst single sample: 6.08 µg/L
23/24 SYR4 2013–2019
Bromodichloromethane
11.93 µg/L
No EPA limit set
worst single sample: 12.1 µg/L
22/24 SYR4 2013–2019
Dibromochloromethane
35.505 µg/L
No EPA limit set
worst single sample: 36.9 µg/L
22/24 SYR4 2013–2019
Bromoform
51.39 µg/L
No EPA limit set
worst single sample: 55 µg/L
20/24 SYR4 2013–2019
Dibromoacetic Acid
9.6 µg/L
No EPA limit set
worst single sample: 10.5 µg/L
19/19 SYR4 2013–2019
TTHM
104.1 µg/L 130%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 105 µg/L
19/19 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
25.82 µg/L 43%
of the EPA limit 60 µg/L
worst single sample: 27.8 µg/L
19/19 SYR4 2013–2019
Trichloroacetic Acid
3.58 µg/L
No EPA limit set
worst single sample: 4.3 µg/L
19/19 SYR4 2013–2019
Dichloroacetic Acid
2.375 µg/L
No EPA limit set
worst single sample: 2.6 µg/L
16/19 SYR4 2013–2019
Nitrate
27.7 µg/L 0.3%
of the EPA limit 10000 µg/L
 14/16 SYR4 2013–2019
Monobromoacetic Acid
1.3 µg/L
No EPA limit set
 13/19 SYR4 2013–2019
Lead
2.435 µg/L 16%
of the EPA limit 15 µg/L
worst single sample: 2.6 µg/L
12/32 SYR4 2013–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 8/8 LCR 2025
Monochloroacetic Acid
11.01 µg/L
No EPA limit set
worst single sample: 11.4 µg/L
4/19 SYR4 2013–2019
Barium
39.65 µg/L 2%
of the EPA limit 2000 µg/L
worst single sample: 40 µg/L
3/3 SYR4 2013–2019
Fluoride
281.2 µg/L 7%
of the EPA limit 4000 µg/L
worst single sample: 282 µg/L
3/3 SYR4 2013–2019
Nitrate-Nitrite
27.2 µg/L 0.3%
of the EPA limit 10000 µg/L
worst single sample: 27.5 µg/L
3/3 SYR4 2013–2015
Arsenic
0.7410 µg/L 7.4%
of the EPA limit 10 µg/L
 1/3 SYR4 2013–2019
Chromium
2.1 µg/L 2.1%
of the EPA limit 100 µg/L
 1/3 SYR4 2013–2019
58 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
NORRIS, JOHN, DEE
Phone
903-348-4611
Email
cowboysteel2k@gmail.com

Frequently asked questions about City of Yantis

Is City of Yantis tap water safe to drink?

EPA monitoring detected 20 contaminants in City of Yantis's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in City of Yantis's water?

EPA monitoring detected Copper, Chloroform, Bromodichloromethane, Dibromochloromethane, Bromoform, and others. The full list with the level and data source for each is above.

How many people does City of Yantis serve?

City of Yantis reports serving 488 people in Texas, per its EPA record.

Has City of Yantis had any water quality violations?

The EPA has 84 violations on file for City of Yantis, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.