Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MR | Monitoring | Resolved | 2025-07-01 → 2025-09-30 |
| MR | Monitoring | Resolved | 2025-07-01 → 2025-09-30 |
| MR | Monitoring | Resolved | 2025-07-01 → 2025-09-30 |
| MR | Monitoring | Resolved | 2025-07-01 → 2025-09-30 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2024-10-17 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 686 µg/L 53% of the EPA limit 1300 µg/L | 21/21 | SYR4 | 2015–2017 |
| Bromodichloromethane | 4.2 µg/L No EPA limit set | 14/14 | SYR4 | 2013–2019 |
| Bromoform | 7.2 µg/L No EPA limit set | 14/14 | SYR4 | 2013–2019 |
| Dibromochloromethane | 8.3 µg/L No EPA limit set | 14/14 | SYR4 | 2013–2019 |
| Nitrate | 40 µg/L 0.4% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Lead | 66.9 µg/L 446% of the EPA limit, in the worst sample — 15 µg/L | 13/21 | SYR4 | 2015–2017 |
| Chloroform | 2.5 µg/L No EPA limit set | 9/14 | SYR4 | 2013–2019 |
| Lead | 0.0016 mg/L 11% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2023 |
| TTHM | 17.3 µg/L 22% of the EPA limit 80 µg/L | 7/7 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 4.2 µg/L 7% of the EPA limit 60 µg/L | 7/7 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.5 µg/L No EPA limit set | 6/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.9 µg/L No EPA limit set | 6/7 | SYR4 | 2013–2019 |
| Fluoride | 190 µg/L 4.8% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Barium | 232 µg/L 12% of the EPA limit 2000 µg/L | 2/2 | SYR4 | 2015–2018 |
| Nitrate-Nitrite | 30 µg/L 0.3% of the EPA limit 10000 µg/L | 2/3 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 7.3 pCi/L No EPA limit set | 1/1 | SYR4 | 2015 |
| Xylenes, Total | 0.6000 µg/L 0% of the EPA limit 10000 µg/L | 1/7 | SYR4 | 2015–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Stockdale
Is City of Stockdale tap water safe to drink?
EPA monitoring detected 17 contaminants in City of Stockdale's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Stockdale's water?
EPA monitoring detected Copper, Bromodichloromethane, Bromoform, Dibromochloromethane, Nitrate, and others. The full list with the level and data source for each is above.
How many people does City of Stockdale serve?
City of Stockdale reports serving 1,201 people in Texas, per its EPA record.
Has City of Stockdale had any water quality violations?
The EPA has 30 violations on file for City of Stockdale, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.