Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| Other | Monitoring | Resolved | 2026-04-02 |
| Other | Monitoring | Resolved | 2026-04-02 |
| Other | Monitoring | Resolved | 2026-03-16 |
| Other | Monitoring | Resolved | 2026-03-16 |
| MR | Monitoring | Unaddressed | 2025-10-01 |
| MR | Monitoring | Unaddressed | 2025-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 220 µg/L 17% of the EPA limit 1300 µg/L | 65/68 | SYR4 | 2013–2019 |
| Nitrate | 80 µg/L 0.8% of the EPA limit 10000 µg/L | 40/44 | SYR4 | 2012–2019 |
| Lead | 3.1 µg/L 21% of the EPA limit 15 µg/L | 20/68 | SYR4 | 2013–2019 |
| Lead | 0.00010 mg/L 0.7% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Bromoform | 12 µg/L No EPA limit set | 13/22 | SYR4 | 2013–2019 |
| Dibromochloromethane | 20 µg/L No EPA limit set | 13/22 | SYR4 | 2013–2019 |
| Bromodichloromethane | 16 µg/L No EPA limit set | 11/22 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 70 µg/L 0.7% of the EPA limit 10000 µg/L | 9/9 | SYR4 | 2012–2015 |
| TTHM | 14.8 µg/L 19% of the EPA limit 80 µg/L | 9/9 | SYR4 | 2013–2019 |
| Barium | 117 µg/L 5.9% of the EPA limit 2000 µg/L | 8/8 | SYR4 | 2016–2019 |
| Fluoride | 390 µg/L 9.8% of the EPA limit 4000 µg/L | 6/6 | SYR4 | 2014–2017 |
| Gross Beta Particle Activity | 12.2 pCi/L No EPA limit set | 6/6 | SYR4 | 2013–2019 |
| Lithium | 58.6 µg/L No EPA limit set | 6/6 | UCMR-5 | 2024 |
| Dibromoacetic Acid | 1.3 µg/L No EPA limit set | 5/9 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 2.4 µg/L 4% of the EPA limit 60 µg/L | 5/9 | SYR4 | 2013–2019 |
| Chloroform | 6.8 µg/L No EPA limit set | 3/22 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 4.6 pCi/L 92% of the EPA limit 5 pCi/L | 3/3 | SYR4 | 2013–2016 |
| Gross Alpha, Excl. Radon And U | 3.3 pCi/L 22% of the EPA limit 15 pCi/L | 2/5 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.3 µg/L No EPA limit set | 1/9 | SYR4 | 2013–2019 |
| Selenium | 3.1 µg/L 6.2% of the EPA limit 50 µg/L | 1/8 | SYR4 | 2016–2019 |
89 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Floresville
Is City of Floresville tap water safe to drink?
EPA monitoring detected 20 contaminants in City of Floresville's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Floresville's water?
EPA monitoring detected Copper, Nitrate, Lead, Lead, Bromoform, and others. The full list with the level and data source for each is above.
How many people does City of Floresville serve?
City of Floresville reports serving 8,306 people in Texas, per its EPA record.
Has City of Floresville had any water quality violations?
The EPA has 27 violations on file for City of Floresville, of which 4 are health-based (a contaminant limit or required treatment was breached) and 6 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.