Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2022-09-01 → 2022-09-30 |
| MON | Monitoring | Resolved | 2022-09-01 → 2022-09-30 |
| MON | Monitoring | Resolved | 2022-09-01 → 2022-09-30 |
| MON | Monitoring | Resolved | 2022-09-01 → 2022-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 230 µg/L 2.3% of the EPA limit 10000 µg/L | 14/14 | SYR4 | 2013–2019 |
| Bromodichloromethane | 15 µg/L No EPA limit set | 13/13 | SYR4 | 2013–2019 |
| Bromoform | 8.7 µg/L No EPA limit set | 13/13 | SYR4 | 2013–2019 |
| Chloroform | 14.3 µg/L No EPA limit set | 13/13 | SYR4 | 2013–2019 |
| Dibromochloromethane | 23.4 µg/L No EPA limit set | 13/13 | SYR4 | 2013–2019 |
| Barium | 56.1 µg/L 2.8% of the EPA limit 2000 µg/L | 5/5 | SYR4 | 2013–2019 |
| Cyanide | 110 µg/L 55% of the EPA limit 200 µg/L | 5/5 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 7.5 µg/L No EPA limit set | 5/5 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 7.4 µg/L No EPA limit set | 5/5 | SYR4 | 2013–2019 |
| Fluoride | 670 µg/L 17% of the EPA limit 4000 µg/L | 5/5 | SYR4 | 2013–2019 |
| TTHM | 55.3 µg/L 69% of the EPA limit 80 µg/L | 5/6 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 17.7 µg/L 30% of the EPA limit 60 µg/L | 5/5 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.7 µg/L No EPA limit set | 3/5 | SYR4 | 2013–2019 |
| Copper | 4.4 µg/L 0.3% of the EPA limit 1300 µg/L | 2/2 | SYR4 | 2013–2016 |
| Arsenic | 0.7190 µg/L 7.2% of the EPA limit 10 µg/L | 1/5 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 4 pCi/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 1.6 µg/L No EPA limit set | 1/5 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 3.9 µg/L No EPA limit set | 1/5 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 60 µg/L 0.6% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Brushy Creek Regional Utility Authority
Is Brushy Creek Regional Utility Authority tap water safe to drink?
EPA monitoring detected 19 contaminants in Brushy Creek Regional Utility Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Brushy Creek Regional Utility Authority's water?
EPA monitoring detected Nitrate, Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Brushy Creek Regional Utility Authority serve?
Brushy Creek Regional Utility Authority reports serving 0 people in Texas, per its EPA record.
Has Brushy Creek Regional Utility Authority had any water quality violations?
The EPA has 4 violations on file for Brushy Creek Regional Utility Authority, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.