Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2014-05-01 → 2014-05-31 |
| MCL | Health-based | Resolved | 2014-05-01 → 2014-05-31 |
| MCL | Health-based | Resolved | 2014-05-01 → 2014-05-31 |
| MCL | Health-based | Resolved | 2014-05-01 → 2014-05-31 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-06-30 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-06-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 207 µg/L 16% of the EPA limit 1300 µg/L | 40/42 | SYR4 | 2014–2017 |
| Lead | 2.4 µg/L 16% of the EPA limit 15 µg/L | 18/42 | SYR4 | 2014–2017 |
| Bromodichloromethane | 6.5 µg/L No EPA limit set | 8/8 | SYR4 | 2012–2019 |
| Bromoform | 5.8 µg/L No EPA limit set | 8/8 | SYR4 | 2012–2019 |
| Dibromochloromethane | 8.7 µg/L No EPA limit set | 8/8 | SYR4 | 2012–2019 |
| TTHM | 23.2 µg/L 29% of the EPA limit 80 µg/L | 8/8 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 5.6 µg/L 9.3% of the EPA limit 60 µg/L | 8/8 | SYR4 | 2012–2019 |
| Chloroform | 3.6 µg/L No EPA limit set | 7/8 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.5 µg/L No EPA limit set | 7/8 | SYR4 | 2012–2019 |
| Lead | 0.00050 mg/L 3.3% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2023 |
| Dichloroacetic Acid | 3.1 µg/L No EPA limit set | 5/8 | SYR4 | 2012–2019 |
| Lithium | 71.8 µg/L No EPA limit set | 2/2 | UCMR-5 | 2025 |
29 contaminants tested, none detected
Utility contact
Frequently asked questions about Williamson County Wsid 3
Is Williamson County Wsid 3 tap water safe to drink?
EPA monitoring detected 15 contaminants in Williamson County Wsid 3's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Williamson County Wsid 3's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Bromoform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Williamson County Wsid 3 serve?
Williamson County Wsid 3 reports serving 8,265 people in Texas, per its EPA record.
Has Williamson County Wsid 3 had any water quality violations?
The EPA has 37 violations on file for Williamson County Wsid 3, of which 8 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.