Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2013-12-30 |
| Other | Monitoring | Archived | 1992-12-01 → 1992-12-31 |
| MR | Monitoring | Archived | 1992-12-01 → 1992-12-31 |
| MR | Monitoring | Archived | 1991-09-01 → 1991-09-30 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0050 µg/L | 1/3 | 2023 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 27.9 µg/L No EPA limit set | 63/63 | SYR4 | 2012–2019 |
| Chloroform | 38.5 µg/L No EPA limit set | 63/63 | SYR4 | 2012–2019 |
| Dibromochloromethane | 20.5 µg/L No EPA limit set | 63/63 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 19.7 µg/L No EPA limit set | 63/63 | SYR4 | 2012–2019 |
| TTHM | 88 µg/L 110% of the EPA limit, in the worst sample — 80 µg/L | 63/63 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 41.8 µg/L 70% of the EPA limit 60 µg/L | 63/63 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 12.9 µg/L No EPA limit set | 63/63 | SYR4 | 2012–2019 |
| Bromoform | 6.6 µg/L No EPA limit set | 62/63 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 8.6 µg/L No EPA limit set | 62/63 | SYR4 | 2012–2019 |
| Copper | 752 µg/L 58% of the EPA limit 1300 µg/L | 60/60 | SYR4 | 2013–2017 |
| Lead | 2.93 µg/L 20% of the EPA limit 15 µg/L | 18/60 | SYR4 | 2013–2017 |
| Lead | 0.00084 mg/L 5.6% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Monochloroacetic Acid | 4.3 µg/L No EPA limit set | 11/63 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.9 µg/L No EPA limit set | 7/63 | SYR4 | 2012–2019 |
| Lithium | 9.26 µg/L No EPA limit set | 1/4 | UCMR-5 | 2023 |
28 contaminants tested, none detected
Utility contact
Frequently asked questions about Block House Mud
Is Block House Mud tap water safe to drink?
EPA monitoring detected 16 contaminants in Block House Mud's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Block House Mud's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Block House Mud serve?
Block House Mud reports serving 6,618 people in Texas, per its EPA record.
Has Block House Mud had any water quality violations?
The EPA has 4 violations on file for Block House Mud, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.