Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 354.55 µg/L 27% of the EPA limit 1300 µg/L
worst single sample: 2553 µg/L | 70/72 | SYR4 | 2014–2017 |
| Lead | 4.78 µg/L 32% of the EPA limit 15 µg/L
worst single sample: 12.2 µg/L | 45/72 | SYR4 | 2014–2017 |
| Bromodichloromethane | 40.7 µg/L No EPA limit set
worst single sample: 47.5 µg/L | 41/41 | SYR4 | 2012–2019 |
| Chloroform | 367 µg/L No EPA limit set
worst single sample: 413 µg/L | 41/41 | SYR4 | 2012–2019 |
| Dibromochloromethane | 20.4 µg/L No EPA limit set
worst single sample: 21.7 µg/L | 41/41 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 93.775 µg/L No EPA limit set
worst single sample: 104 µg/L | 36/36 | SYR4 | 2012–2019 |
| TTHM | 413.25 µg/L 517% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 466 µg/L | 36/36 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 146.5 µg/L 244% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 185 µg/L | 36/36 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 68.2 µg/L No EPA limit set
worst single sample: 75.7 µg/L | 36/36 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.83 µg/L No EPA limit set
worst single sample: 5.4 µg/L | 28/36 | SYR4 | 2012–2019 |
| Bromoform | 2.53 µg/L No EPA limit set
worst single sample: 2.61 µg/L | 17/41 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 11.64 µg/L No EPA limit set
worst single sample: 13 µg/L | 17/36 | SYR4 | 2012–2019 |
| Lead | 0.0019 mg/L 13% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2023 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Beechwood Wsc
Is Beechwood Wsc tap water safe to drink?
EPA monitoring detected 13 contaminants in Beechwood Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Beechwood Wsc's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Beechwood Wsc serve?
Beechwood Wsc reports serving 1,138 people in Texas, per its EPA record.
Has Beechwood Wsc had any water quality violations?
The EPA has 216 violations on file for Beechwood Wsc, of which 131 are health-based (a contaminant limit or required treatment was breached) and 8 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.