Tap WaterIndex

← Texas

Tap water quality report

M&L Wsc

EPA monitoring tested this supplier for 79 contaminants and detected 24. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

79
contaminants tested
24
detected
513
people served
0
health-based violations
Texas rankingsLead in TexasPFAS in Texas
Water source
Ground water
Ownership
Local government
Counties served
Parker

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
361
violations on file
1
still open
ViolationTypeStatusPeriod
RPT Monitoring Unaddressed 2025-07-02
Other Monitoring Resolved 2025-07-01
Other Monitoring Resolved 2025-07-01
MR Monitoring Resolved 2019-01-01 → 2019-03-31
MR Monitoring Resolved 2019-01-01 → 2019-03-31
MR Monitoring Resolved 2019-01-01 → 2019-03-31
MR Monitoring Resolved 2019-01-01 → 2019-03-31
MR Monitoring Resolved 2015-10-01
MR Monitoring Resolved 2015-10-01
MR Monitoring Resolved 2015-10-01

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
1270 µg/L 13%
of the EPA limit 10000 µg/L
 32/32 SYR4 2012–2019
Copper
1000 µg/L 77%
of the EPA limit 1300 µg/L
 14/14 SYR4 2016–2017
Dibromochloromethane
6.21 µg/L
No EPA limit set
 11/19 SYR4 2013–2019
Bromoform
12.8 µg/L
No EPA limit set
 10/19 SYR4 2013–2019
Bromodichloromethane
2.85 µg/L
No EPA limit set
 7/19 SYR4 2013–2019
Barium
130 µg/L 6.5%
of the EPA limit 2000 µg/L
 6/6 SYR4 2016–2019
Fluoride
274 µg/L 6.9%
of the EPA limit 4000 µg/L
 6/6 SYR4 2012–2018
Lead
0.0030 mg/L 20%
of the EPA limit 0.0150 mg/L
 6/6 LCR 2023
TTHM
7.55 µg/L 9.4%
of the EPA limit 80 µg/L
 5/8 SYR4 2013–2019
Chloroform
2.4 µg/L
No EPA limit set
 4/19 SYR4 2013–2019
Chromium
3.7 µg/L 3.7%
of the EPA limit 100 µg/L
 4/6 SYR4 2016–2019
Combined Radium (-226 And -228)
4.2 pCi/L 84%
of the EPA limit 5 pCi/L
 4/4 SYR4 2012–2018
Nitrate-Nitrite
1150 µg/L 12%
of the EPA limit 10000 µg/L
 4/4 SYR4 2014–2019
Combined Uranium
3.4 µg/L 11%
of the EPA limit 30 µg/L
 3/3 SYR4 2015–2018
Gross Alpha, Excl. Radon And U
7 pCi/L 47%
of the EPA limit 15 pCi/L
 3/3 SYR4 2015–2018
Total Haloacetic Acids (HAA5)
3 µg/L 5%
of the EPA limit 60 µg/L
 3/8 SYR4 2013–2019
Dibromoacetic Acid
1.3 µg/L
No EPA limit set
 2/8 SYR4 2013–2019
Lead
1.7 µg/L 11%
of the EPA limit 15 µg/L
 2/14 SYR4 2016–2017
Cyanide
19.4 µg/L 9.7%
of the EPA limit 200 µg/L
 1/4 SYR4 2014–2017
Di(2-ethylhexyl) Phthalate
0.6000 µg/L 10%
of the EPA limit 6 µg/L
 1/6 SYR4 2012–2019
Gross Beta Particle Activity
4.3 pCi/L
No EPA limit set
 1/4 SYR4 2012–2018
Monochloroacetic Acid
1.7 µg/L
No EPA limit set
 1/8 SYR4 2013–2019
Trichloroacetic Acid
1.4 µg/L
No EPA limit set
 1/8 SYR4 2013–2019
Xylenes, Total
2.14 µg/L 0%
of the EPA limit 10000 µg/L
 1/11 SYR4 2014–2019
55 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDichloroacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
KINGSTON, JOE
Phone
817-713-8677
Email
1totalwater@gmail.com

Frequently asked questions about M&L Wsc

Is M&L Wsc tap water safe to drink?

EPA monitoring detected 24 contaminants in M&L Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in M&L Wsc's water?

EPA monitoring detected Nitrate, Copper, Dibromochloromethane, Bromoform, Bromodichloromethane, and others. The full list with the level and data source for each is above.

How many people does M&L Wsc serve?

M&L Wsc reports serving 513 people in Texas, per its EPA record.

Has M&L Wsc had any water quality violations?

The EPA has 361 violations on file for M&L Wsc, of which 0 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.