Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2023-08-01 → 2023-08-31 |
| MCL | Health-based | Resolved | 2023-08-01 → 2023-08-31 |
| MCL | Health-based | Resolved | 2023-08-01 → 2023-08-31 |
| MCL | Health-based | Resolved | 2023-08-01 → 2023-08-31 |
| MCL | Health-based | Archived | 2017-04-01 → 2017-06-30 |
| MCL | Health-based | Archived | 2017-04-01 → 2017-06-30 |
| MCL | Health-based | Archived | 2017-04-01 → 2017-06-30 |
| MCL | Health-based | Resolved | 1996-04-01 → 1996-06-30 |
| MCL | Health-based | Resolved | 1996-01-01 → 1996-03-31 |
| MR | Monitoring | Resolved | 2023-07-01 → 2023-12-31 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0095 µg/L | 4/4 | 2025 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chlorite | 1003 µg/L 100% of the EPA limit, in the worst sample — 1000 µg/L | 228/228 | SYR4 | 2013–2019 |
| Bromodichloromethane | 22.8 µg/L No EPA limit set | 136/136 | SYR4 | 2012–2019 |
| Bromoform | 61.4 µg/L No EPA limit set | 136/136 | SYR4 | 2012–2019 |
| Dibromochloromethane | 37.8 µg/L No EPA limit set | 136/136 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 15.6 µg/L No EPA limit set | 128/128 | SYR4 | 2012–2019 |
| TTHM | 107 µg/L 134% of the EPA limit, in the worst sample — 80 µg/L | 128/129 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 41.4 µg/L 69% of the EPA limit 60 µg/L | 128/128 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 32.1 µg/L No EPA limit set | 120/128 | SYR4 | 2012–2019 |
| Chloroform | 18.1 µg/L No EPA limit set | 119/136 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 7.8 µg/L No EPA limit set | 118/128 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 5.2 µg/L No EPA limit set | 88/128 | SYR4 | 2012–2019 |
| Copper | 498 µg/L 38% of the EPA limit 1300 µg/L | 80/95 | SYR4 | 2013–2017 |
| Monochloroacetic Acid | 5.6 µg/L No EPA limit set | 37/128 | SYR4 | 2012–2019 |
| Lead | 11 µg/L 73% of the EPA limit 15 µg/L | 29/95 | SYR4 | 2013–2017 |
| Nitrate | 164 µg/L 1.6% of the EPA limit 10000 µg/L | 18/18 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2023 |
| Fluoride | 610 µg/L 15% of the EPA limit 4000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Barium | 150 µg/L 7.5% of the EPA limit 2000 µg/L | 7/7 | SYR4 | 2013–2019 |
| Cyanide | 128 µg/L 64% of the EPA limit 200 µg/L | 4/6 | SYR4 | 2014–2019 |
| Arsenic | 1.3 µg/L 13% of the EPA limit 10 µg/L | 3/7 | SYR4 | 2013–2019 |
| Lithium | 11.6 µg/L No EPA limit set | 3/4 | UCMR-5 | 2025 |
| Selenium | 3.1 µg/L 6.2% of the EPA limit 50 µg/L | 2/7 | SYR4 | 2013–2019 |
| Antimony, Total | 0.2340 µg/L 3.9% of the EPA limit 6 µg/L | 1/7 | SYR4 | 2013–2019 |
| Chromium | 3.1 µg/L 3.1% of the EPA limit 100 µg/L | 1/7 | SYR4 | 2013–2019 |
| Combined Uranium | 1.2 µg/L 4% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2017 |
| Di(2-ethylhexyl) Phthalate | 0.7000 µg/L 12% of the EPA limit 6 µg/L | 1/11 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 6.2 pCi/L No EPA limit set | 1/1 | SYR4 | 2017 |
80 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Mineral Wells
Is City of Mineral Wells tap water safe to drink?
EPA monitoring detected 28 contaminants in City of Mineral Wells's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Mineral Wells's water?
EPA monitoring detected Chlorite, Bromodichloromethane, Bromoform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does City of Mineral Wells serve?
City of Mineral Wells reports serving 15,564 people in Texas, per its EPA record.
Has City of Mineral Wells had any water quality violations?
The EPA has 21 violations on file for City of Mineral Wells, of which 9 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.